📚 Educational reference — no pricing, not for sale. Independent used-machine research and seller-source discovery are available in our market directory.
💰 What's your Micro Dynamics MEGA 30VT worth? — get a free number →Field observation · IMTS 2026. The displayed MEGA 30VT shows the enclosed work area, trunnion-table layout, control, and show-floor installation. The photograph documents the exhibited machine; option-dependent capability must still be confirmed from its build record.
📋 Manufacturer-published model data · reference reviewed 2026-09-25. Specifications describe the model family. Control licensing, spindle, face plate, tool capacity, probing, and option packages can differ by build; verify the serial-specific machine record. Methodology · Data sources.
About the Micro Dynamics MEGA 30VT
The MEGA 30VT is a compact trunnion-table vertical machining center built for indexed access to multiple faces in fewer setups. Micro Dynamics’ configuration guidance describes 4+1-axis machining as the standard platform and true simultaneous 5-axis motion as an available upgrade. That distinction matters when researching a used machine: the model name alone does not establish that a particular control and build has the simultaneous option enabled.
MEGA 30VT at IMTS 2026
Field observation: Machine Blue Book photography documents the MEGA 30VT on the IMTS 2026 floor from the front and at the operator station. The images show the enclosure, trunnion work area, control position, and show installation; they do not establish unseen options, accuracy history, or the configuration of another unit.
Operator-side view with the control and trunnion machining area visible.The MEGA 30VT beside the larger TERA 50V during the show-floor presentation.
Buyer fit and configuration checks
The platform is relevant when multi-side access and fewer reclamp operations matter more than a large fixed table. Before comparing an individual unit with another multi-axis machine, confirm the items that change capability and value.
Axis mode: verify whether the control is licensed and configured for indexed 4+1 work or optional simultaneous 5-axis motion.
Trunnion and load: identify the installed face plate, workholding, hydraulic routing, and allowable load through the intended tilt range.
Spindle and tooling: confirm taper interface, spindle speed option, tool-magazine capacity, holders, probes, and collision history.
Condition: request geometry and rotary-axis checks, maintenance records, hours, alarm history, and a representative cutting test.
