Reference Library › Vertical Machining Centers › VMC 15XT

Reference recordMBB·VERTICAL-MACHINING-CENTERS/FADAL-VMC-15XTUpdated 2026-10-16

MakeFadal

ModelVMC 15XT

Machine typeVertical Machining Centers

Table Size38" x 16 " (965mm x 406mm)

Floor to Table30.5" (775mm)

T-Slots (No. x Width x Span)3 x .562" x 4.33" (3 x 14mm x 110mm)

Cutting Feed Rate.01-250" ipm (375 @ 150%) (.25-6,350 (9,525 at 150%) mm/min)

Rapid Feed Rate (X/Y/Z)400 ipm (10.1 m/min)

Max. Weight on Table1,500 lbs (680 kg)

Axis Drive Motor (X/Y/Z)DC, 3,500 lbs

Ball Screw Size31.75mm Dia.

Longitudinal (X Axis)30" (762mm)

Cross (Y Axis)16" (406mm)

Vertical (Z Axis)20" (28" Opt.) (508mm (711mm Opt.))

Spindle Nose to Table4"-24" (4"-32" Opt.) (102mm-610mm (102-813mm))

Spindle Center to Column Ways17" (431mm)

Spindle motor (standard) - Automatic 2 Speed Vector (rated peak)15 HP, 11.2 KW

Torque75 ft-lbs

Accuracy, Axis Positioning± .0002" (.0050mm)

Accuracy, Axis Repeatability± .0001" (.0025mm)

Spindle Speed10-7,500 rpm

Spindle TaperNo. 40

ATC, Number of Tools21

Max. Tool Diameter3" (76mm)

Max. Tool Length15" (381mm)

Max. Tool Weight15 lbs. (6.8kg)

Machine Width and Depth75" W x 77" D

Machine Maximum Height101"

Machine Weight5,800 lbs. (2495kg)

Air Pressure Reqs. (Momentary) (the Fadal manual prints 120 psi and 5.5 bar, which do not agree; see manufacturer)120 psi, 15 scfm

Power Reqs. (3-phase)40/45 amps, 230 VAC

Single Phase (Optional)60 amps, 230 VAC

📋 Spec data: Detailed (29 fields) · compiled from manufacturer and public sources · reference updated 2026-10-16.
Source: Fadal Maintenance Manual, Section 01: Specifications, March 2003 (archived copy). These are the manufacturer’s own values for the VMC 15XT as Fadal published it in March 2003; machines built earlier or later may differ. These specifications describe the model in general. The year, control generation, spindle, and option package of a specific unit may differ — always verify against the actual machine. Methodology · Data sources.

Fadal

VMC 15XT

Evidence updated 16 October 2026: specifications. How evidence is dated

Market evidence

Median published asking price$12,700

Middle half of asking prices: $9,600 – $17,350
Distinct asking-price points: 10

Prices by year →Observed records

Published asking prices, not completed sales or appraisals. Year, condition, options and location move the value of an exact machine.

Plan the installInstalled cost →

Machine weight (published)5,800 lb ≈ 2,631 kgFloor & foundation Rigging

From the published model specification. Spindle rating is not the machine’s total connected load; confirm the exact unit’s data plate and electrical drawings.

Asking prices and estimate for this model →

💰 What's your Fadal VMC 15XT worth? — get a free number →

About the Fadal VMC 15XT

The Fadal VMC 15XT is catalogued under Vertical Machining Centers in The Machine Blue Book CNC machine reference library. This entry documents the machine for identification and education; the specifications above are Fadal’s own published values (the VMC 15XT as Fadal published it in March 2003) and describe the model as the manufacturer documented it then, not a specific unit.

Specification sources

Every value above is copied as the manufacturer printed it (inch value first, metric value in brackets when both were printed). A newer document is never used for an older machine. Fadal no longer publishes these documents: they are read from the Internet Archive’s copy of fadal.com, a lower-tier (archived) manufacturer source. 4 metric values printed beside an imperial value that do not convert to it are not shown (the imperial value is).

Fadal Machining Centers — Fadal Maintenance Manual, Section 01: Specifications (March 2003), March 2003 (manufacturer manual (PDF on fadal.com), archived copy). Used for: values. Archived copy (web.archive.org).

Used market research

Research Fadal VMC 15XT in the used-machine market directory → — review current and historical seller-source records, then verify availability directly with the originating source.

Related machines

Fadal VMC 15 Fadal VMC 3016 Fadal VMC 4020 Haas VC-400 DMG Mori (Gildemeister) DMV 110 Haas VF-5/40XT

Machinery terms

What Is a VMC What Is a Machining Center?Automatic Tool Changer Spindle & Spindle Taper Explained What Is CNC?CNC Controls Spindle Hours vs Machine Hours

What's your Fadal VMC 15XT worth?

Get a real number for your Fadal VMC 15XT from a Machine Blue Book specialist — free, no obligation.

Or email info@themachinebluebook.com. Only a response to this request unless you separately opt in. Privacy · Terms.