VMC 6030HT
Evidence updated : manufacturer videos. How evidence is dated
- Machine weight (published)17,000 lb ≈ 7,711 kgFloor & foundationRigging
From the published model specification. Spindle rating is not the machine’s total connected load; confirm the exact unit’s data plate and electrical drawings.
Fadal 907 6030HT CNC Vertical Machining Center, VMC
About the Fadal VMC 6030HT
The Fadal VMC 6030HT is catalogued under Vertical Machining Centers in The Machine Blue Book CNC machine reference library. This entry documents the machine for identification and education; the specifications above are Fadal’s own published values (the VMC 6030 fitted with Fadal's optional High Torque (HT) spindle motor, as Fadal published it in March 2003) and describe the model as the manufacturer documented it then, not a specific unit.
Specification sources
Every value above is copied as the manufacturer printed it (inch value first, metric value in brackets when both were printed). A newer document is never used for an older machine. 5 values where two Fadal documents disagree are not shown.
- Fadal Machining Centers — Fadal Maintenance Manual, Section 01: Specifications (March 2003), March 2003 (manufacturer manual (PDF on fadal.com), archived copy). Used for: values. Archived copy (web.archive.org).
- Fadal Machining Centers — VMC 6030 specification sheet (PDF created 2001-11-09), November 2001 (manufacturer spec sheet (PDF on fadal.com), archived copy). Used for: cross-check only (values that disagree with it are not shown). Archived copy (web.archive.org).
Showroom
Research Fadal VMC 6030HT in the Showroom → — specifications, photos and side-by-side compare.