ModelMCV-AII
Width Between Columns64.96 in (1,650 mm)
Width Between Columns (options / other configurations)80.71 in (2,050 mm)
Table Travel (X-Axis)78.74 in (2,000 mm)
Travel — X-axis (table front / back) — MCV-AII 16 x 30, mm (in) (corrected: okuma.com showed '118.11, 157.48, 196.85 in (3,000; 4,000; 5,000 mm)'; per the Okuma MCV-AII (double-column machining center, MCV-AII 16 / MCV-AII 20) brochure, Sep 2025, p. 9)3,000 (118.11)
Travel — X-axis (table front / back) — MCV-AII 20 x 30, mm (in) (corrected: okuma.com showed '118.11, 157.48, 196.85 in (3,000; 4,000; 5,000 mm)'; per the Okuma MCV-AII (double-column machining center, MCV-AII 16 / MCV-AII 20) brochure, Sep 2025, p. 9)3,000 (118.11)
Travel — X-axis (table front / back) — MCV-AII 20 x 40, mm (in) (corrected: okuma.com showed '118.11, 157.48, 196.85 in (3,000; 4,000; 5,000 mm)'; per the Okuma MCV-AII (double-column machining center, MCV-AII 16 / MCV-AII 20) brochure, Sep 2025, p. 9)4,000 (157.48)
Travel — X-axis (table front / back) — MCV-AII 20 x 50, mm (in) (corrected: okuma.com showed '118.11, 157.48, 196.85 in (3,000; 4,000; 5,000 mm)'; per the Okuma MCV-AII (double-column machining center, MCV-AII 16 / MCV-AII 20) brochure, Sep 2025, p. 9)5,200 (204.72)
Spindle Range4,000 [6,000; 10,000] rpm
Spindle Power (corrected: option hp per the Okuma MCV-AII brochure, Sep 2025, p. 9)30/25 hp (22/18.5 kW) (30 min/cont)
Spindle Power, option 6,000 min⁻¹ spindle (corrected: hp per the Okuma MCV-AII brochure, Sep 2025, p. 9)30/20 hp (22/15 kW) (30 min/cont)
Spindle Power, option 10,000 min⁻¹ spindle (added: per the Okuma MCV-AII brochure, Sep 2025, p. 9)30 hp (22 kW) (cont)
Rapid Traverse Rate X-Y/Z787.4 / 393.7 ipm (20 / 10 m/min)
Magazine Capacity24
Magazine Capacity (options / other configurations)50 72, 100
Table — Working surface, mm (in)1,200 × 1,800 (47.24 × 70.87)
Table — Maximum load, kg (lb)6,000 (13,200)
Floor space (machine only, 24-tool ATC), mm (in)4,935 × 6,260 (194.29 × 246.46)
Mass (machine only, 24-tool ATC), kg (lb)19,500 (42,900)
Motors — Axis feed drives, kW (hp)X: 3.5 (4.7), Y, Z: 4.2 (5.6)
Travel — Y-axis (spindlehead left/right), mm (in)1,600 (62.99)
Travel — W-axis (crossrail up/down), mm (in)1,000 (39.37)
Travel — Table to spindle nose, mm (in)0 to 1,360 (0 to 53.54)
Table — T-slots (T-slots width x No. <center pitch>), mm20H7 x 9 (center 140, both ends 100)
Table — Height from machine bottom, mm (in)700 (27.56)
Machine Size — Height, mm (in)4,375 (172.24)
Travel — Z-axis (quill up/down), mm (in)450 (17.72)
Spindle — Taper bore7/24 taper No. 50
Spindle — Bearing diameter, mm (in)ø100 (3.94)
Cutting feed rate, mm/min (ipm)1 to 10,000 (0.04 to 393.70)
Feed rates — Crossrail traverse, mm/min (ipm)412/495 (16.22/19.49) (50/60 Hz)
Automatic Tool Changer (ATC) — Tool shankMAS BT50
Automatic Tool Changer (ATC) — Pull studMAS2
Automatic Tool Changer (ATC) — Max tool diameter (w/ adjacent tools), mm (in)ø128 (5.04)
Automatic Tool Changer (ATC) — Max tool diameter (w/o adjacent tools), mm (in)ø230 (9.06)
Automatic Tool Changer (ATC) — Max tool length, mm (in)400 (15.75)
Automatic Tool Changer (ATC) — Max tool mass, kg (lb)20 (44)
Motors — Crossrail elevating, kW (hp)3.7 (5)
Electrical power supply, kVA40
Power Sources — Compressed air supply, L/min (ANR)500 (0.5 MPa or more)
CNC — OSP-P500M standard specificationsOSP-P500M
Travel: other configurations and options (5)
Table to spindle nose (option: 10,000 min⁻¹ spindle), mm (in)0 to 1,380 (0 to 54.33)
Travel — Y-axis (spindlehead left/right) — MCV-AII 20 type (20 x 30, 20 x 40, 20 x 50), mm (in)2,000 (78.74)
Travel — W-axis (crossrail up/down) — MCV-AII 20 type (20 x 30, 20 x 40, 20 x 50), mm (in)1,150 (45.28)
Travel — Table to spindle nose — MCV-AII 20 type (20 x 30, 20 x 40, 20 x 50), mm (in)0 to 1,510 (0 to 59.45)
Table to spindle nose (option: 10,000 min⁻¹ spindle) — MCV-AII 20 type (20 x 30, 20 x 40, 20 x 50), mm (in)0 to 1,530 (0 to 60.24)
Machine Size: other configurations and options (11)
Height (option: 10,000 min⁻¹ spindle), mm (in)4,535 (178.54)
Floor space (machine only, 24-tool ATC) — MCV-AII 16 x 30, mm (in)4,935 × 8,000 (194.29 × 314.96)
Mass (machine only, 24-tool ATC) — MCV-AII 16 x 30, kg (lb)21,300 (46,860)
Floor space (machine only, 24-tool ATC) — MCV-AII 20 x 30, mm (in)5,335 × 8,100 (210.04 × 318.90)
Mass (machine only, 24-tool ATC) — MCV-AII 20 x 30, kg (lb)25,100 (55,220)
Floor space (machine only, 24-tool ATC) — MCV-AII 20 x 40, mm (in)5,335×10,100 (210.04 × 397.64)
Mass (machine only, 24-tool ATC) — MCV-AII 20 x 40, kg (lb)27,600 (60,720)
Floor space (machine only, 24-tool ATC) — MCV-AII 20 x 50, mm (in)5,335 × 12,920 (210.04 × 508.66)
Mass (machine only, 24-tool ATC) — MCV-AII 20 x 50, kg (lb)30,500 (67,100)
Machine Size — Height — MCV-AII 20 type (20 x 30, 20 x 40, 20 x 50), mm (in)4,585 (180.51)
Height (option: 10,000 min⁻¹ spindle) — MCV-AII 20 type (20 x 30, 20 x 40, 20 x 50), mm (in)4,745 (186.81)
Spindle: other configurations and options (1)
Bearing diameter (option: 6,000 / 10,000 min⁻¹ spindles), mm (in)ø85 (3.35)
Motors: other configurations and options (3)
Crossrail elevating (option: auto-positioning crossrail), kW (hp)3.6 (4.8)
Motors — Axis feed drives — MCV-AII 20 x 40, kW (hp)X, Y, Z: 4.2 (5.6)
Motors — Axis feed drives — MCV-AII 20 x 50, kW (hp)X: 4.6 (6.1), Y, Z: 4.2 (5.6)
Table: other configurations and options (10)
Table — Working surface — MCV-AII 16 x 30, mm (in)1,200 × 2,800 (47.24 × 110.24)
Table — Maximum load — MCV-AII 16 x 30, kg (lb)8,000 (17,600)
Table — Working surface — MCV-AII 20 x 30, mm (in)1,500 × 2,800 (59.06 × 110.24)
Table — Maximum load — MCV-AII 20 x 30, kg (lb)10,000 (22,000)
Table — Working surface — MCV-AII 20 x 40, mm (in)1,500 × 3,800 (59.06 × 149.61)
Table — Maximum load — MCV-AII 20 x 40, kg (lb)12,000 (26,400)
Table — Working surface — MCV-AII 20 x 50, mm (in)1,500 × 5,000 (59.06 × 196.85)
Table — Maximum load — MCV-AII 20 x 50, kg (lb)16,000 (35,200)
Table — T-slots (T-slots width x No. <center pitch>) — MCV-AII 20 type (20 x 30, 20 x 40, 20 x 50), mm20H7 x 11 (center 140, both ends 100)
Table — Height from machine bottom — MCV-AII 20 type (20 x 30, 20 x 40, 20 x 50), mm (in)750 (29.53)
Power Sources: other configurations and options (1)
Electrical power supply — MCV-AII 20 x 50, kVA45
