ModelLT2000 EX
Max Turning DiameterØ8.27 in (Ø210 mm)
Max Turning Length5.12 in (130 mm)
Spindle Nose TypeØ140 flat
Spindle Nose Type (options / other configurations)A2-6
Speed Range50~6,000 [50~5,000 (left spindle only)] rpm
Standard Power (corrected: 11.5 kW per the Okuma LT2000 EX brochure, Jul 2025, p. 10)L&R: 15.3/10 hp (L&R: 11.5/7.5 kW) (5 min/cont)
Standard Power (options / other configurations)30/20 hp (22/15 kW)
Rapid traverse — X-axis, m/min (ipm) (corrected: okuma.com showed 'X/Z: 1,181/1,575 C: 200 rpm Y: 591 ipm (X/Z: 30/40 C: 200…'; per the Okuma LT2000 EX (TWIN STAR LT EX series) brochure, Jul 2025, p. 10)30 (1,181)
Rapid traverse — Z-axis, m/min (ipm) (corrected: okuma.com showed 'X/Z: 1,181/1,575 C: 200 rpm Y: 591 ipm (X/Z: 30/40 C: 200…'; per the Okuma LT2000 EX (TWIN STAR LT EX series) brochure, Jul 2025, p. 10)40 (1,575)
Rapid traverse — C-axis, min⁻¹ (corrected: okuma.com showed 'X/Z: 1,181/1,575 C: 200 rpm Y: 591 ipm (X/Z: 30/40 C: 200…'; per the Okuma LT2000 EX (TWIN STAR LT EX series) brochure, Jul 2025, p. 10)200
Rapid traverse — Y-axis — 1MY / 2MY (2-turret), m/min (ipm) (corrected: okuma.com showed 'X/Z: 1,181/1,575 C: 200 rpm Y: 591 ipm (X/Z: 30/40 C: 200…'; per the Okuma LT2000 EX (TWIN STAR LT EX series) brochure, Jul 2025, p. 10)15 (591)
Capacity — Swing over saddle, mm (in)ø400 (ø15.75)
Capacity — Distance between noses, mm (in)960 (37.80)
Travel — X-axis, mm (in)XA, XB: 205 (8.07) (+175 to −30)
Travel — Z-axis, mm (in)ZA, ZB: 700 (27.56)
Travel — Z-axis — W, mm (in)W: 730 (28.74)
Travel — C-axis, deg360 (minimum control angle 0.001)
Spindle bore / Front bearing ID, mm (in)ø62/100 (ø2.44/3.94)
Turret (U/L) — TypeMultitasking V16
Turret (U/L) — OD tool shank, mm (in)□20/ø32 (3/4 × 3/4 / ø1-1/4)
Turret (U/L) — Milling tool spindle speed, min⁻¹45 to 6,000
Rapid traverse — W-axis, m/min (ipm)32 (1,260)
Motors — Milling tool (2 min/cont), kW (hp)5.5/3.7 (7.5/5)
Motors — X-axis, kW (hp)XA: 3.5 (4.7), XB: 3.0 (4)
Motors — Z-axis, kW (hp)ZA, ZB: 3.5 (4.7)
Machine size — Height — Chip discharge, side, mm (in)2,339 (92.09)
Machine size — Floor space (including tank) — Chip discharge, side, mm (in)3,745 × 2,540 (147.44 × 100.00)
Machine size — Mass (with CNC), kg (lb)8,500 (18,700)
CNCOSP-P500L
Standard specifications — spindle torque (5 min/cont), N-m183/119
Milling tool spindle power/torque diagram — Standard V16 turret — spindle torque (2 min/cont), N-m22.5/15
Spindle (L/R): other configurations and options (1)
Spindle bore / Front bearing ID (option: left spindle only), mm (in)ø80/120 (ø3.15/4.72)
Turret (U/L): other configurations and options (2)
Type (option)V12
No. of tools (option: V12 turret)12
Machine size: other configurations and options (6)
Machine size — Height — Chip discharge, rear, mm (in)2,489 (97.99)
Machine size — Floor space (including tank) — Chip discharge, rear, mm (in)3,231 × 3,493 (127.20 × 137.52)
Machine size — Height — Chip discharge, side — 1MY / 2MY (2-turret), mm (in)2,380 (93.70)
Machine size — Mass (with CNC) — 1MY / 2MY (2-turret), kg (lb)9,000 (19,800)
Machine size — Mass (with CNC) — 3M (3-turret), kg (lb)9,300 (20,460)
Machine size — Mass (with CNC) — 2MY / 3MY (3-turret), kg (lb)9,800 (21,560)
Travel: other configurations and options (4)
Travel — Y-axis — 1MY (2-turret), mm (in)YA: 95 (3.74) (+50 to −45)
Travel — X-axis — 3-turret specs, mm (in)XA, XB, XC: 205 (8.07) (+175 to −30)
Travel — Z-axis — 3-turret specs, mm (in)ZA, ZC: 400 (15.75), ZB: 730 (28.74)
Travel — Z-axis — W — 3-turret specs, mm (in)W: 760 (29.92)
Motors: other configurations and options (1)
Motors — Ys-axis — 1MY (2-turret), kW (hp)YsA: 3.5 (4.7)
Capacity: other configurations and options (1)
Capacity — Distance between noses — 3-turret specs, mm (in)990 (38.98)
Milling tool spindle power/torque diagram: other configurations and options (1)
V12 turret (option) — spindle torque (2 min/cont), N-m31.3/20.9
