VMC 3016
Evidence updated : manufacturer videos. How evidence is dated
- Machine weight (published)8,550 lb ≈ 3,878 kgFloor & foundationRigging
From the published model specification. Spindle rating is not the machine’s total connected load; confirm the exact unit’s data plate and electrical drawings.
Fadal 904 VMC 3016 CNC Vertical Machining Center
About the Fadal VMC 3016
The Fadal VMC 3016 is catalogued under Vertical Machining Centers in The Machine Blue Book CNC machine reference library. This entry documents the machine for identification and education; the specifications above are Fadal’s own published values (the VMC 3016 as Fadal published it in March 2003) and describe the model as the manufacturer documented it then, not a specific unit.
Specification sources
Every value above is copied as the manufacturer printed it (inch value first, metric value in brackets when both were printed). A newer document is never used for an older machine. 2 values where two Fadal documents disagree are not shown. Fadal no longer publishes these documents: they are read from the Internet Archive’s copy of fadal.com, a lower-tier (archived) manufacturer source. 2 metric values printed beside an imperial value that do not convert to it are not shown (the imperial value is).
- Fadal Machining Centers — Fadal Maintenance Manual, Section 01: Specifications (March 2003), March 2003 (manufacturer manual (PDF on fadal.com), archived copy). Used for: values. Archived copy (web.archive.org).
- Fadal Machining Centers — VMC 3016 specification sheet (PDF on fadal.com), September 2004 (manufacturer spec sheet (PDF on fadal.com), archived copy). Used for: cross-check only (values that disagree with it are not shown). Archived copy (web.archive.org).
Showroom
Research Fadal VMC 3016 in the Showroom → — specifications, photos and side-by-side compare.