SB-35L
Evidence updated : manuals and documents. How evidence is dated
- Spindle motor rating40 hp ≈ 29.8 kWPower planning
From the published model specification. Spindle rating is not the machine’s total connected load; confirm the exact unit’s data plate and electrical drawings.
About the Haas SB-35L
The Haas SB-35L is catalogued under Turning Centers & Lathes in The Machine Blue Book CNC machine reference library. This entry documents the machine for identification and education; specifications above are compiled from manufacturer and public sources and describe the model, not a specific unit.
Site & utilities
| Electrical | 220 VAC 3-phase, 70 A full-load 440 VAC 3-phase, 35 A full-load (footnoted in the source guide) |
|---|---|
| Compressed air | 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar); minimum 80 psi; 3/8 in hose |
| Shipping weight (crated / palletized) | 16,425 lb (7,450 kg) |
| Shipping footprint (pallet, L × W × H) | 214.5 in x 90.5 in x 99.0 in |
Current-production values published by Haas. An older unit may differ — confirm on the machine’s data plate and electrical drawings before you order power, air or rigging.
Source: Haas Automation pre-installation guide for the SB-35L, retrieved 2026-10-27. Plan it: electrical · rigging · installed cost.
Showroom
Research Haas SB-35L in the Showroom → — specifications, photos and side-by-side compare.
Related machines
Machinery terms
Manufacturer documents
Published by the manufacturer. Each link opens the document on the manufacturer’s site.
- Spindle torque chart (SB-35L) pub-aem.haascnc.com
All Haas manuals and documentation →