ModelGENOS L3000-e
Max Turning DiameterØ 13.39 in (Ø 340 mm)
Max Turning Length19.69 in (500 mm)
Spindle Nose TypeJIS A2-8
Speed Range38~3,800 rpm
Power 20 min30 hp (22 kW)
Power cont.20 hp (15 kW)
Rapid Traverse X, Z82.03, 98.43 fpm (25/30 m/min)
Motor — Main spindle (20 min/cont), kW (hp) (corrected: okuma.com showed '22 kW'; per the Okuma GENOS L2000-e / GENOS L3000-e brochure, Feb 2022, p. 10)22/15 (30/20)
Capacity — Swing over bed, mm (in)ø520 (20.47)
Capacity — Swing over saddle, mm (in)ø400 (15.75)
Travel — X-axis, mm (in)235 (9.25)
Travel — Z-axis, mm (in)520 (20.47)
Spindle — Bore dia, mm (in)ø80 (3.15)
Spindle — Front bearing dia, mm (in)ø120 (4.72)
Turret — TypeV12
Turret — No. of tools, tool12
Turret — OD tool shank, in1 square
Turret — ID tool shank dia, inø1-1/2
Turret — Indexing time, sec/index0.3
Feed rate — Rapid traverse (tailstock), m/min (fpm)12 (39.37)
Tailstock travel, mm (in)400 (15.75)
Motor — Axis drive (X), kW (hp)2.8 (3.7)
Motor — Axis drive (Z), kW (hp)3.5 (4.7)
Tailstock travel (motor), kW (hp)2.9 (3.9)
Coolant motor (50/60 Hz), kW (hp)0.55 (3/4) / 0.75 (1)
Machine size — Height, mm (in)1,791 (70.51)
Machine size — Floor space (tank included), mm (in)2,545 × 1,870 (100.20 × 73.62)
Machine size — Mass, kg (lb)5,000 (11,000)
ControllerOSP-P300LA-e
Machine size: other configurations and options (10)
Machine size — Floor space (tank included) — (L) T, mm (in)2,280 × 1,870 (89.76 × 73.62)
Machine size — Mass — (L) T, kg (lb)4,700 (10,340)
Machine size — Height — (L) C DBC 1100, mm (in)2,057 (80.98)
Machine size — Floor space (tank included) — (L) C DBC 1100, mm (in)3,560 × 2,453 (140.16 × 96.57)
Machine size — Mass — (L) C DBC 1100, kg (lb)6,600 (14,520)
Machine size — Height — (MY) T, C DBC 400, mm (in)2,242 (88.27)
Machine size — Mass — (MY) C DBC 400, kg (lb)5,190 (11,418)
Machine size — Height — (MYW), mm (in)2,265 (89.17)
Machine size — Floor space (tank included) — (MYW), mm (in)3,035 x 1,992 (119.49 x 78.43)
Machine size — Mass — (MYW), kg (lb)6,000 (13,200)
Capacity: other configurations and options (9)
Capacity — Max work length — (L) C DBC 1100, mm (in)1,100 (43.31)
Capacity — Max turning dia — (M), mm (in)ø300 (11.81)
Capacity — Max work length — (M) T, C DBC 450, mm (in)380 (14.96)
Capacity — Max work length — (M) C DBC 1000, mm (in)980 (38.58)
Capacity — Max turning dia — (MY), (MYW), mm (in)ø390 (15.35)
Capacity — Max work length — (MY) T, C DBC 400, mm (in)350 (13.78)
Capacity — Max work length — (MY) C DBC 1000, mm (in)950 (37.40)
Capacity — Swing over saddle — (MYW), mm (in)ø260 (10.24)
Capacity — Max work length — (MYW), mm (in)150 (5.91)
Travel: other configurations and options (4)
Travel — Z-axis — (L) C DBC 1100, mm (in)1,144 (45.04)
Travel — C-axis control angle — (M), (MY), (MYW), deg360 (minimum control angle 0.001)
Travel — Y-axis — (MY), (MYW), mm (in)100 (3.94) (±50 (1.97))
Travel — W-axis — (MYW), mm (in)520 (20.47)
Tailstock: other configurations and options (1)
Tailstock travel — (L) C DBC 1100, mm (in)980 (38.58)
Motor: other configurations and options (4)
Motor — Axis drive (Z) — (L) C DBC 1100, kW (hp)4.6 (6.1)
Motor — Milling tool spindle (2 min/cont) — (M), (MY), (MYW), kW (hp)5.5/3.7 (7.5/5)
Motor — Axis drive (Ys) — (MY), (MYW), kW (hp)3.5 (4.7)
Motor — Sub-spindle (30 min/cont) — (MYW), kW (hp)7.5/5.5 (10/7.5)
Turret: other configurations and options (1)
Turret — Indexing time — (M), (MY), (MYW), sec/index0.1
Milling tool: other configurations and options (1)
Milling tool — Spindle speed — (M), (MY), (MYW), min⁻¹45 to 6,000
Feed rate: other configurations and options (3)
Feed rate — Rapid traverse (C) — (M), (MY), (MYW), min⁻¹200
Feed rate — Rapid traverse — (MY), m/min (fpm)X: 25 (82.03), Z: 30 (98.43), Y: 10 (32.81)
Feed rate — Rapid traverse — (MYW), m/min (fpm)X: 25 (82.03), Z: 30 (98.43), Y: 10 (32.81), W: 25 (82.03)
Sub-spindle: other configurations and options (4)
Sub-spindle — Speed — (MYW), min⁻¹100 to 6,000
Sub-spindle — Nose type — (MYW)ø140 flat
Sub-spindle — Bore dia — (MYW), mm (in)ø53 (2.09)
Sub-spindle — Front bearing dia — (MYW), mm (in)ø80 (3.15)
