ModelMULTUS U2000
Max Turning DiameterØ25.59 in (Ø650 mm)
Spindle Nose TypeJIS A2-6
Speed Range50~5,000 rpm
Main spindle motor (30 min/cont), kW (hp) (corrected: okuma.com showed '29/20 hp (22/15 kW)'; per the Okuma MULTUS U1000 / MULTUS U2000 brochure, Feb 2026, p. 32)22/15 (29/20)
Rapid Traverse X1,969 ipm (50 m/min)
Rapid Traverse Y1,575 ipm (40 m/min)
Rapid Traverse Z1,969 ipm (50 m/min)
Lineup — Chuck size8 inches
Capacity — Swing over saddle, mm (in)ø650 (ø25.59)
Capacity — Max machining length, mm (in)830 (32.68)
Travels — X-axis, mm (in)550 (21.65)
Travels — Z-axis upper, mm (in)880 (34.65)
Travels — Y-axis, mm (in)220 (±110) (8.66 (±4.33))
Travels — C-axis control angle, degree360 (min controlled angle: 0.0001)
Travels — B-axis indexing angle, degree-30 to +210 (min controlled angle: 0.001)
Spindle — Taper bore / Bearing dia, mm (in)ø80/ø120 (ø3.15/ø4.72)
Type (upper turret)H1
Milling tool spindle (upper turret), min⁻¹50 to 12,000
Feed rates — C-, B-axis, min⁻¹C: 200, B: 30
Auto tool changer (ATC) — Tool shankHSK-A63
Auto tool changer (ATC) — No. of tools, tools80
Auto tool changer (ATC) — Max tool dia (w/o adjacent tools in brackets), mm (in)ø90 (ø3.54) (w/o adjacent tools: ø130 (ø5.12))
Auto tool changer (ATC) — Max tool length, mm (in)250 (9.84) (from gauge line)
Auto tool changer (ATC) — Max tool mass, kg (lb)5 (11)
Milling tool spindle motor (upper turret) (5 min/cont), kW (hp)16/11 (21/15)
W-axis motor, kW (hp)W: 2.8 (3.7)
Machine size — Height, mm (in)2,600 (102.36)
Machine size — Floor space W × D (tank included), mm × mm (in)4,446 × 2,345 (175.04 × 92.32)
Machine size — Mass, kg (lb)14,600 (32,120)
CNCOSP-P500S
The Spindle Lineup — Max torque — std spindle (10 min/cont), N-m427/280
The Spindle Lineup — Max torque — upper turret milling tool spindle (5 min/cont), N-m57.3/47.7
Coolant motor (50Hz/60Hz), kW (brochure contradiction: the hp group converts the pump counts; the kW group used; Okuma MULTUS U1000 / MULTUS U2000 brochure, Feb 2026, p. 32)0.4/0.25 × 1, 0.75/1.1 × 2, 2.2/2.2 × 1
Capacity: other configurations and options (6)
Capacity — Swing over saddle — Lower (2SC/2SW), mm (in)ø200 (ø7.87)
Capacity — Distance between nose and center (between noses) (1SC), mm (in)1,065 (41.93)
Capacity — Distance between nose and center (between noses) (1SW), mm (in)1,149 (45.24)
Capacity — Distance between nose and center (between noses) (2SC), mm (in)1,005 (39.57)
Capacity — Distance between nose and center (between noses) (2SW), mm (in)1,149 (45.24)
Capacity — Max machining dia — Lower (2SC/2SW), mm (in)ø200 (ø7.87)
Travels: other configurations and options (4)
Travels — X-axis — Lower (2SC/2SW), mm (in)160 (6.30)
Travels — Z-axis lower (2SC/2SW), mm (in)850 (33.46)
Travels — W-axis (1SW), mm (in)850 (33.46)
Travels — W-axis (2SW), mm (in)850 (33.46)
Opposing spindle: other configurations and options (6)
Opposing spindle speed (1SW), min⁻¹50 to 5,000
Opposing spindle nose shape (1SW)JIS A2-6
Opposing spindle taper bore / bearing dia (1SW), mm (in)ø80/ø120 (ø3.15/ø4.72)
Opposing spindle speed (2SW), min⁻¹38 to 5,000
Opposing spindle nose shape (2SW)JIS A2-6
Opposing spindle taper bore / bearing dia (2SW), mm (in)ø62/ø100 (ø2.44/ø3.94)
Motor: other configurations and options (4)
Opposing spindle motor (30 min/cont) (1SW), kW (hp)22/15 (29/20)
Opposing spindle motor (20 min/cont) (2SW), kW (hp)22/15 (29/20)
X-, Z-, Y-, B-axis motors (1SC/1SW), kW (hp)X: 5.2, Z: 3.5, Y: 2.8, B: 3.0 (X: 6.9, Z: 4.7, Y: 3.7, B: 4.0)
X-, Z-, Y-, B-axis motors (2SC/2SW), kW (hp)XA: 5.2, ZA: 3.5, Y: 2.8, B: 3.0, XB: 3.0, ZB: 3.5 (XA: 6.9, ZA: 4.7, Y: 3.7, B: 4.0, XB: 4.0, ZB: 4.7)
Turret (milling tool spindle): other configurations and options (4)
Turret (milling tool spindle) — Type — Lower (2SC/2SW)V12
Turret (milling tool spindle) — No. of tools — Lower (2SC/2SW)12
Turret (milling tool spindle) — Tool shank dimensions / ID tool shank diameter (1SC/1SW), mm (in)□25 (1 × 1)/ø40 (ø1-1/2)
Turret (milling tool spindle) — Tool shank dimensions / ID tool shank diameter (2SC/2SW), mm (in)□25 (1 × 1)/Upper: ø40 (ø1-1/2), Lower: ø32 (ø1-1/4)
Feed rates: other configurations and options (3)
Feed rates — X-, Z-axis lower (2SC/2SW), m/min (ipm)X: 30, Z: 40 (X: 1,181, Z: 1,575)
Feed rates — W-axis (1SC/2SC), m/min (ipm)12 (472)
Feed rates — W-axis (1SW/2SW), m/min (ipm)40 (1,575)
Tailstock: other configurations and options (2)
Tailstock — Tapered bore (1SC/2SC)MT No.4
Tailstock — Travel (1SC/2SC), mm (in)850 (33.46)
The Spindle Lineup: other configurations and options (2)
The Spindle Lineup — Max torque — opposing spindle (10 min/cont) (1SW), N-m427/280
The Spindle Lineup — Max torque — opposing spindle (20 min/cont) (2SW), N-m420.2/286.5
Optional specifications (3)
Lower turret milling tool spindle speed (option: Lower turret V12 multitasking, 2SW), min⁻¹6,000
Lower turret milling tool spindle motor (2 min/cont) (option: Lower turret V12 multitasking, 2SW), kW5.5/3.7
Tool shank profile (option: CAPTO C6)CAPTO C6
