Reference Library › Vertical Machining Centers › MCR-BV

Reference recordMBB·VERTICAL-MACHINING-CENTERS/OKUMA-MCR-BVUpdated 2026-10-10

Photo: Okuma (manufacturer)

MakeOkuma

ModelMCR-BV

Machine typeVertical Machining Centers

Width Between Columns (corrected unit: okuma.com labels the metric values 'in')104.33 in (2,650 mm)

Width Between Columns (options / other configurations)124.02, 143.70 in (3,150; 3,650 mm)

Table Travel (X-Axis)165.35 [204.72 ~ 480.31] in

Spindle Range30~6,000 rpm

Motors — Spindle drive — High speed (60 min/cont), kW (hp) (corrected: okuma.com showed '57/50/40 hp (43/37/30 kW)'; per the Okuma MCR-BV (MCR-BV25 / 30 / 35) brochure, Sep 2024, p. 17)43/37 (57/50)

Motors — Spindle drive — Low speed (10 min/cont), kW (hp) (corrected: okuma.com showed '57/50/40 hp (43/37/30 kW)'; per the Okuma MCR-BV (MCR-BV25 / 30 / 35) brochure, Sep 2024, p. 17)43/30 (57/40)

Spindle Power (options / other configurations)35/30 hp (26/22 kW)

Rapid Traverse Rate (XYZ) (corrected: units per the Okuma MCR-BV brochure, Sep 2024, p. 17 — X-axis travel 6,700 mm or less)1,181 x 1,260 x 591 ipm (30 x 32 x 15 m/min)

Rapid Traverse Rate (XYZ), X-axis travel over 6,700 mm (added: per the Okuma MCR-BV brochure, Sep 2024, p. 17)787 x 1,260 x 591 ipm (20 x 32 x 15 m/min)

Magazine Capacity50

Magazine Capacity (options / other configurations)80, 100, 120, 180

Table working surface2,000 × 4,000 (78.74 × 157.48) to 3,000 × 12,000 (118.11 × 472.44) [mm (in)]

Machine size (W × D × H)7,370 × 10,730 × 6,420 to 8,340 × 27,930 × 6,700 mm (290.16 × 422.44 × 252.76 to 328.35 × 1,099.61 × 263.78 in)

Effective width between columns2,650 to 3,650 mm (104.33 to 143.70 in)

Travel — Y-axis (spindlehead left/right), mm (in)3,200 (125.98)

Travel — Z-axis (ram up/down), mm (in)800 (31.50)

Travel — W-axis (crossrail up/down), mm (in)1,000 (39.37)

Travel — Table to spindle nose, mm (in)0 to 1,650 (0 to 64.96)

Table — Maximum load, kg (lb)22,000 (48,400)

Table — T-slots Width × No. <center pitch>, mm24H7 × 11 <center 200, both ends 130>

Table — Height from machine bottom, mm (in)850 (33.46)

Spindle (Extension head) — Taper bore7/24 taper No. 50

Spindle (Extension head) — Bearing diameter (6,000 / 10,000 min-1 spec), mm (in)ø85 (ø3.35)

Cutting feed rate, mm/min (ipm)1 to 10,000 (0.04 to 393.70)

Feed rate — W-axis travel rate, m/min (ipm)3 (118)

Automatic Tool Changer — Tool shankMAS BT50

Automatic Tool Changer — Pull studMAS2

Automatic Tool Changer — Max tool diameter (w/ adjacent tools), mm (in)ø135 (5.31)

Automatic Tool Changer — Max tool diameter (w/o adjacent tools), mm (in)ø230 (9.06)

Automatic Tool Changer — Max tool length, mm (in)400 (15.75)

Automatic Tool Changer — Max tool mass, kg (lb)25 (55)

Standard spindle — Max torque (10 min/cont), N-m1,406/981

Motors — Crossrail elevating, kW (hp)W: 4.6 (6.1) × 2

Electrical power supply, kVA85

Power Sources — Compressed air supply, L/min (ANR)1,000 (0.5 MPa or more)

Mass (machine only), kg (lb)47,000 (103,400)

OSP-P500M standard specifications — CNCOSP-P500M

Travel: other configurations and options (24)

Z-axis (ram up/down) (option: Z-axis travel 1,000 mm spec), mm (in)1,000 (39.37)

Travel — Table to spindle nose (250 mm long extension head), mm (in)0 to 1,550 (0 to 61.02)

Travel — X-axis (table front / back) — MCR-BV25 25 × 30, mm (in)3,200 (125.98)

Travel — X-axis (table front / back) — MCR-BV25 25 × 50, mm (in)5,200 (204.72)

Travel — X-axis (table front / back) — MCR-BV25 25 × 65, mm (in)6,700 (263.78)

Travel — X-axis (table front / back) — MCR-BV25 25 × 80, mm (in)8,200 (322.83)

Travel — X-axis (table front / back) — MCR-BV30 30 × 40, mm (in)4,200 (165.35)

Travel — X-axis (table front / back) — MCR-BV30 30 × 50, mm (in)5,200 (204.72)

Travel — X-axis (table front / back) — MCR-BV30 30 × 65, mm (in)6,700 (263.78)

Travel — X-axis (table front / back) — MCR-BV30 30 × 80, mm (in)8,200 (322.83)

Travel — X-axis (table front / back) — MCR-BV30 30 × 100, mm (in)10,200 (401.57)

Travel — X-axis (table front / back) — MCR-BV30 30 × 120, mm (in)12,200 (480.31)

Travel — X-axis (table front / back) — MCR-BV35 35 × 50, mm (in)5,200 (204.72)

Travel — X-axis (table front / back) — MCR-BV35 35 × 65, mm (in)6,700 (263.78)

Travel — X-axis (table front / back) — MCR-BV35 35 × 80, mm (in)8,200 (322.83)

Travel — X-axis (table front / back) — MCR-BV35 35 × 100, mm (in)10,200 (401.57)

Travel — X-axis (table front / back) — MCR-BV35 35 × 120, mm (in)12,200 (480.31)

Travel — Y-axis (spindlehead left/right) — MCR-BV30, mm (in)3,700 (145.67)

Travel — Y-axis (spindlehead left/right) — MCR-BV35, mm (in)4,200 (165.35)

Travel — W-axis (crossrail up/down) — MCR-BV30 / 35, mm (in)1,200 (47.24)

Travel — Table to spindle nose — MCR-BV30, mm (in)0 to 1,850 (0 to 72.83)

Travel — Table to spindle nose — MCR-BV35, mm (in)0 to 1,800 (0 to 70.87)

Travel — Table to spindle nose — MCR-BV30, 250 mm long extension head, mm (in)0 to 1,750 (0 to 68.90)

Travel — Table to spindle nose — MCR-BV35, 250 mm long extension head, mm (in)0 to 1,700 (0 to 66.93)

[Pallet] (APC, option): other configurations and options (2)

Working surface (pallet) (option), mm (in)2,000 × 3,700 (78.74 × 145.67)

Maximum load (pallet) (option), kg (lb)8,000 (17,600)

Spindle (Extension head): other configurations and options (4)

Speed range (option: 4,000 min-1 spindle), min⁻¹30 to 4,000

Speed range (option: 10,000 min-1 spindle), min⁻¹30 to 10,000

Bearing diameter (option: 4,000 min-1 and high-power 6,000 min-1 specs), mm (in)ø100 (ø3.94)

Bearing diameter (option: high-power 4,000 min-1 spec), mm (in)ø130 (ø5.12)

Feed rate: other configurations and options (6)

Feed rate — Rapid traverse (Die/mold kit spec), m/min (ipm)X: 20, Y: 20, Z: 10 (X: 787, Y: 787, Z: 394)

Feed rate — Rapid traverse — MCR-BV25 25 × 80, m/min (ipm)X: 20, Y: 32, Z: 15 (X: 787, Y: 1,260, Z: 591)

Feed rate — Rapid traverse — MCR-BV30 30 × 40 / 30 × 50 / 30 × 65, m/min (ipm)X: 30, Y: 32, Z: 15 (X: 1,181, Y: 1,260, Z: 591)

Feed rate — Rapid traverse — MCR-BV30 30 × 80 / 30 × 100 / 30 × 120, m/min (ipm)X: 20, Y: 32, Z: 15 (X: 787, Y: 1,260, Z: 591)

Feed rate — Rapid traverse — MCR-BV35 35 × 50 / 35 × 65, m/min (ipm)X: 30, Y: 32, Z: 15 (X: 1,181, Y: 1,260, Z: 591)

Feed rate — Rapid traverse — MCR-BV35 35 × 80 / 35 × 100 / 35 × 120, m/min (ipm)X: 20, Y: 32, Z: 15 (X: 787, Y: 1,260, Z: 591)

Automatic Tool Changer: other configurations and options (1)

Max tool length (option), mm (in)600 (23.62)

Spindle variations: other configurations and options (1)

10,000 min-1 Spindle (option) — Max torque (30 min/cont), N-m735/622

Machine Size: other configurations and options (31)

Height (option: Z-axis travel 1,000 mm spec), mm (in)6,620 (260.63)

Floor space (machine only) — MCR-BV25 25 × 30, mm (in)7,370 × 8,430 (290.16 × 331.89)

Floor space (machine only) — MCR-BV25 25 × 50, mm (in)7,370 × 12,830 (290.16 × 505.12)

Floor space (machine only) — MCR-BV25 25 × 65, mm (in)7,370 × 16,430 (290.16 × 646.85)

Floor space (machine only) — MCR-BV25 25 × 80, mm (in)7,370 × 19,430 (290.16 × 764.96)

Floor space (machine only) — MCR-BV30 30 × 40, mm (in)7,870 × 10,730 (309.84 × 422.44)

Floor space (machine only) — MCR-BV30 30 × 50, mm (in)7,870 × 12,830 (309.84 × 505.12)

Floor space (machine only) — MCR-BV30 30 × 65, mm (in)7,870 × 16,430 (309.84 × 646.85)

Floor space (machine only) — MCR-BV30 30 × 80, mm (in)7,870 × 19,430 (309.84 × 764.96)

Floor space (machine only) — MCR-BV30 30 × 100, mm (in)7,870 × 23,930 (309.84 × 942.13)

Floor space (machine only) — MCR-BV30 30 × 120, mm (in)7,870 × 27,930 (309.84 × 1,099.61)

Floor space (machine only) — MCR-BV35 35 × 50, mm (in)8,340 × 12,830 (328.35 × 505.12)

Floor space (machine only) — MCR-BV35 35 × 65, mm (in)8,340 × 16,430 (328.35 × 646.85)

Floor space (machine only) — MCR-BV35 35 × 80, mm (in)8,340 × 19,430 (328.35 × 764.96)

Floor space (machine only) — MCR-BV35 35 × 100, mm (in)8,340 × 23,930 (328.35 × 942.13)

Floor space (machine only) — MCR-BV35 35 × 120, mm (in)8,340 × 27,930 (328.35 × 1,099.61)

Mass (machine only) — MCR-BV25 25 × 30, kg (lb)42,000 (92,400)

Mass (machine only) — MCR-BV25 25 × 50, kg (lb)52,000 (114,400)

Mass (machine only) — MCR-BV25 25 × 65, kg (lb)61,000 (134,200)

Mass (machine only) — MCR-BV25 25 × 80, kg (lb)69,000 (151,800)

Mass (machine only) — MCR-BV30 30 × 40, kg (lb)55,000 (121,000)

Mass (machine only) — MCR-BV30 30 × 65, kg (lb)68,000 (149,600)

Mass (machine only) — MCR-BV30 30 × 80, kg (lb)81,000 (178,200)

Mass (machine only) — MCR-BV30 30 × 100, kg (lb)89,000 (195,800)

Mass (machine only) — MCR-BV35 35 × 50, kg (lb)65,000 (143,000)

Mass (machine only) — MCR-BV35 35 × 65, kg (lb)75,000 (165,000)

Mass (machine only) — MCR-BV35 35 × 80, kg (lb)89,000 (195,800)

Mass (machine only) — MCR-BV35 35 × 100, kg (lb)99,000 (217,800)

Mass (machine only) — MCR-BV35 35 × 120, kg (lb)113,000 (248,600)

Machine Size — Height — MCR-BV30 / 35, mm (in)6,700 (263.78)

Mass (machine only) — MCR-BV30 30 × 50, kg (lb) (brochure contradiction: lb printed '129.800'; metric used; Okuma MCR-BV (MCR-BV25 / 30 / 35) brochure, Sep 2024, p. 17)59,000

Table: other configurations and options (34)

Table — Working surface — MCR-BV25 25 × 30, mm (in)2,000 × 3,000 (78.74 × 118.11)

Table — Working surface — MCR-BV25 25 × 50, mm (in)2,000 × 5,000 (78.74 × 196.85)

Table — Working surface — MCR-BV25 25 × 65, mm (in)2,000 × 6,500 (78.74 × 255.91)

Table — Working surface — MCR-BV25 25 × 80, mm (in)2,000 × 8,000 (78.74 × 314.96)

Table — Working surface — MCR-BV30 30 × 40, mm (in)2,500 × 4,000 (98.43 × 157.48)

Table — Working surface — MCR-BV30 30 × 50, mm (in)2,500 × 5,000 (98.43 × 196.85)

Table — Working surface — MCR-BV30 30 × 65, mm (in)2,500 × 6,500 (98.43 × 255.91)

Table — Working surface — MCR-BV30 30 × 80, mm (in)2,500 × 8,000 (98.43 × 314.96)

Table — Working surface — MCR-BV30 30 × 120, mm (in)2,500 × 12,000 (98.43 × 472.44)

Table — Working surface — MCR-BV35 35 × 50, mm (in)3,000 × 5,000 (118.11 × 196.85)

Table — Working surface — MCR-BV35 35 × 65, mm (in)3,000 × 6,500 (118.11 × 255.91)

Table — Working surface — MCR-BV35 35 × 80, mm (in)3,000 × 8,000 (118.11 × 314.96)

Table — Working surface — MCR-BV35 35 × 100, mm (in)3,000 × 10,000 (118.11 × 393.70)

Table — Working surface — MCR-BV35 35 × 120, mm (in)3,000 × 12,000 (118.11 × 472.44)

Table — Maximum load — MCR-BV25 25 × 30, kg (lb)18,000 (39,600)

Table — Maximum load — MCR-BV25 25 × 50, kg (lb)27,000 (59,400)

Table — Maximum load — MCR-BV25 25 × 65, kg (lb)34,000 (74,800)

Table — Maximum load — MCR-BV25 25 × 80, kg (lb)42,000 (92,400)

Table — Maximum load — MCR-BV30 30 × 40, kg (lb)29,000 (63,800)

Table — Maximum load — MCR-BV30 30 × 50, kg (lb)33,000 (72,600)

Table — Maximum load — MCR-BV30 30 × 65, kg (lb)43,000 (94,600)

Table — Maximum load — MCR-BV30 30 × 80, kg (lb)52,000 (114,400)

Table — Maximum load — MCR-BV30 30 × 100, kg (lb)66,000 (145,200)

Table — Maximum load — MCR-BV30 30 × 120, kg (lb)72,600 (159,720)

Table — Maximum load — MCR-BV35 35 × 50, kg (lb)29,500 (64,900)

Table — Maximum load — MCR-BV35 35 × 65, kg (lb)37,000 (81,400)

Table — Maximum load — MCR-BV35 35 × 80, kg (lb)47,000 (103,400)

Table — Maximum load — MCR-BV35 35 × 100, kg (lb)61,000 (134,200)

Table — Maximum load — MCR-BV35 35 × 120, kg (lb)65,000 (143,000)

Table — T-slots Width × No. <center pitch> — MCR-BV30, mm24H7 × 13 <center 200, both ends 180>

Table — T-slots Width × No. <center pitch> — MCR-BV35, mm24H7 × 15 <center 200>

Table — Height from machine bottom — MCR-BV30, mm (in)900 (35.43)

Table — Height from machine bottom — MCR-BV35, mm (in)950 (37.40)

Table — Working surface — MCR-BV30 30 × 100, mm (in) (brochure contradiction: inch printed '393,70'; metric used; Okuma MCR-BV (MCR-BV25 / 30 / 35) brochure, Sep 2024, p. 17)2,500 × 10,000

Motors: other configurations and options (1)

Motors — Crossrail elevating — MCR-BV35, kW (hp)W: 5.2 (7) × 2

📋 Spec data: Detailed (141 fields) · compiled from manufacturer and public sources · reference updated 2026-10-15.
These specifications describe the model in general. The year, control generation, spindle, and option package of a specific unit may differ — always verify against the actual machine. Methodology · Data sources.

Okuma

MCR-BV

Evidence updated 16 October 2026: specifications. How evidence is dated

MBB Model ID MBB-M-46AQYP · What is this?

📚 Educational reference — no pricing, not for sale. Independent used-machine research and seller-source discovery are available in our market directory.

About the Okuma MCR-BV

The Okuma MCR-BV is catalogued under Vertical Machining Centers in The Machine Blue Book CNC machine reference library. This entry documents the machine for identification and education; specifications above are compiled from manufacturer and public sources and describe the model, not a specific unit.

Showroom

Research Okuma MCR-BV in the Showroom → — specifications, photos and side-by-side compare.

Related machines

Okuma MCR-A5CII Okuma MCR-AF Okuma MCR-BIII Okuma VT1000EX Mazak VTC-300C Mazak FJV-60/80

Machinery terms

What Is a VMC What Is a Machining Center?Automatic Tool Changer Spindle & Spindle Taper Explained What Is CNC?CNC Controls Spindle Hours vs Machine Hours

Manuals & documents

All Okuma manuals and documentation →

Standing in front of one? Text the model to (239) 326-0926 for the spec sheet.Call MBB now · (866) 827-2477 Text MBB · (239) 326-0926Automated help 24/7, people during business hours. Message and data rates may apply. Can't talk now? Request a call →