ModelLU3000 EX
Max Turning Diameter16.14 in (410 mm)
Max Turning Length13.78 in (350 mm)
Max Turning Length (options / other configurations)23.63, 39.37 in (600; 1,000 mm)
Spindle Nose TypeA2-6
Spindle Nose Type (options / other configurations)A2-8, A2-11
Speed Range50~5,000 rpm
Speed Range (options / other configurations)42~4,200, 30~3,000 rpm
Standard Power30/20 hp (22/15 kW)
Rapid Traverse X/Z984/1,181 ipm (25 / 30 m/min)
Capacity — Swing over bed, mm (in)ø580 (ø22.83)
Capacity — Max turning dia — Lower turret, mm (in)ø250 (ø9.84)
Travels — X-axis — Upper turret, mm (in)260 (10.24)
Travels — X-axis — Lower turret, mm (in)160 (6.30)
Travels — Z-axis — Upper turret, mm (in)685 (26.97)
Travels — Z-axis — Lower turret, mm (in)615 (24.21)
Spindle — Bore dia, mm (in)ø80 (ø3.15)
Spindle — Front bearing dia, mm (in)ø120 (ø4.72)
Type — Upper turretV12
Type — Lower turretV8
No. of tools — Upper turret, tool12
No. of tools — Lower turret, tool8
Turret — OD tool shank height, mm (in)□25 (1 × 1)
Turret — ID tool shank dia, mm (in)ø40 (ø1-1/2)
Turret index time, sec/1 index0.1
Motor — Axis drive, kW (hp)XA: 2.8 (3.7), XB: 2.2 (3), ZA: 3.5 (4.7), ZB: 3.5 (4.7)
Motor — Coolant pump (50 Hz/60 Hz), kW (hp)0.55/0.75 (3/4 /1)
Machine size — Height, mm (in)2,080 (81.89)
Machine size — Floor space width × depth (including tank), side discharge, mm (in)2,950 × 2,257 (116.14 × 88.86)
Machine size — Mass (w/ CNC), kg (lb)6,400 (14,080)
CNCOSP-P500L
Capacity: other configurations and options (3)
Capacity — Max turning dia — Upper turret (M spec), mm (in)ø340 (ø13.39)
Capacity — DBC (DBN) (2SC × 600), mm (in)816 (32.13)
Capacity — DBC (DBN) (2SC × 1000), mm (in)1,216 (47.87)
Travels: other configurations and options (5)
Travels — Z-axis — Upper turret (2SC × 1000), mm (in)1,085 (42.72)
Travels — Z-axis — Lower turret (2SC × 1000), mm (in)1,015 (39.96)
Travels — Y-axis (MY spec), mm (in)U: 120 (+70 to -50) (U: 4.72 (+2.76 to -1.97))
Travels — W-axis (W spec, 2SW × 600), mm (in)610 (24.02)
Travels — C-axis (M spec), deg360 (0.001)
Spindle: other configurations and options (7)
Bore dia (option: Big-Bore spindle), mm (in)ø91 (ø3.58)
Bore dia (option: Super Big-Bore spindle), mm (in)ø112 (ø4.41)
Front bearing dia (option: Big-Bore spindle), mm (in)ø140 (ø5.51)
Front bearing dia (option: Super Big-Bore spindle), mm (in)ø160 (ø6.30)
Sub-spindle speed (W spec), min⁻¹50 to 6,000
Sub-spindle nose (W spec)ø140 flat
Sub-spindle bore dia (W spec), mm (in)ø43 (1.69)
Milling tool spindle: other configurations and options (1)
Milling tool spindle — Spindle speed (M spec), min⁻¹45 to 6,000
Feed rate: other configurations and options (1)
Feed rate — Rapid traverse C (M spec), min⁻¹C: 200min-1
Tailstock: other configurations and options (2)
Tailstock — Quill dia (2SC), mm (in)ø90 (ø3.54)
Tailstock — Quill travel (2SC), mm (in)120 (4.72)
Motor: other configurations and options (2)
Motor — Milling tool (M spec, upper turret) (25 min/cont), kW (hp)7.1/4.1 (9.5/5.5)
Motor — Sub-spindle (W spec) (20 min/cont), kW (hp)7.5/5.5 (10/7.5)
Machine size: other configurations and options (5)
Machine size — Height (2SC × 1000), mm (in)2,226 (87.64)
Machine size — Floor space width × depth (including tank), rear discharge, mm (in)2,850 × 2,558 (112.20 × 100.71)
Machine size — Floor space width × depth (including tank), side discharge (2SC × 1000), mm (in)3,980 × 2,769 (156.69 × 109.02)
Machine size — Mass (w/ CNC) (2SC × 600), kg (lb)6,700 (14,740)
Machine size — Mass (w/ CNC) (2SC × 1000), kg (lb)8,200 (18,040)
