The Haas DS-25Y combines a main spindle, secondary spindle, Y axis, interpolated C axes and live tooling for turning plus off-center milling, drilling and tapping. Haas lists a 10-inch main chuck, 3-inch bar capacity, 3,400-rpm main spindle and 30 hp maximum rating. The opposed spindles support synchronized part transfer for multi-operation work.
Open the official Haas DS-25Y specifications and support page →
Confirm the exact model year, software and options; main and secondary spindle condition; live-tool and turret operation; C-axis positioning; Y-axis geometry; chuck and drawtube configuration; bar-feed interface; probing; coolant package; and included tooling. Run a warm demonstration that includes part transfer and a representative live-tool operation, then document alarms, maintenance history and measured output.
The current manufacturer specification lists three-phase power and an approximate 12,700-lb shipping weight, but the nameplate and actual configuration control the move. Verify voltage, full-load amperage, air, coolant, pallet dimensions, access, rigging points and the recommissioning plan before purchase.
Research DS-25Y seller-source records in the used-machine directory →. Machine Blue Book is an independent reference and does not sell or guarantee the availability of a listed machine; verify every unit with the originating source.
What is the Haas DS-25Y? A dual-spindle CNC turning center with Y axis, C axes and live tooling.
What is the bar capacity? Haas lists 3.0 inches / 76 mm.
How much does a DS-25Y weigh? Haas lists an approximate 12,700-lb shipping weight for the current standard configuration; verify the exact machine and shipping preparation.
Get a real number for your Haas DS-25Y from a Machine Blue Book specialist — free, no obligation.
