Easytech ET-SM-HD-6000 specifications
Sheet and plate vacuum lifter Easytech ET-SM-HD-6000. Published specifications and the manufacturer's documents, in one reference. No prices: this is a reference, not a listing.

Specifications
| Configuration | Heavy-Duty Horizontal Steel Plate Vacuum Lifter |
|---|---|
| Horizontal lifting load | 6000 kg (rated at 60% vacuum level; non-porous, dry, oil-free metal surfaces) |
| Measurement conditions | 60% vacuum level; non-porous, dry, oil-free metal surfaces |
| Compatible workpiece dimensions | 6000 × 2500 mm |
| Operating power supply | AC480 V / 60 Hz |
| Pad dimensions | 840 × 430 mm |
| Number of pads | 8 pcs |
| Pad material | Nitrile rubber (NBR) |
| Pump power | 2.6 kW |
| Maximum vacuum flow | 72 m³/h |
| Maximum vacuum level | 85% / −85 kPa |
| Equipment weight | 750 kg |
| Vacuum grip / release control | Manual valve and wireless remote |
| Remote control range | ≤ 50 m (project specification) |
| Vacuum alarm | Audible and visual alarm below 60% vacuum or on power failure; independent rechargeable alarm battery |
| Vacuum retention specification | Time to fall from maximum vacuum to 60%: ≥15 min under project-specific conditions |
| Vacuum reservoir | Approximately 5 L |
| Main beam length | 5000 mm |
| Crossbeam length | 1500 mm |
| Crane requirement | 10000 kg or higher crane class, subject to project installation requirements |
| Operating limitations | No standing water, oil, sharp particles or corrosive surfaces |
| When using fewer pads | Deactivating pads reduces load capacity; recalculation is required. |
Source: Easytech (auto-easy.com), checked 2026-11-14
Figures are as the manufacturer publishes them for this configuration. Where a rated load carries a condition (vacuum level, surface, pad layout), the condition is part of the figure. Feature entries read "Yes" only where the manufacturer lists the feature; verify with the manufacturer for the model year. Guide: vacuum lifters for sheet and plate.
Manufacturer manuals and documents
- ET-SM-HD-6000 product page (Easytech) (www.auto-easy.com)
- ET-SM-HD-6000 specification PDF (Easytech) (PDF, www.auto-easy.com)
Links open the document on the manufacturer's own website.
These specifications are compiled from manufacturer sources and are subject to verification and confirmation by the manufacturer for the actual machine or product. Options, control and build year can change what a particular machine has. Verify the most current specifications with the manufacturer on auto-easy.com.