Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
◧ The Machine Blue BookTechnologyReference LibraryMachine DirectoryGlossaryShowroomThe GaugeContactMain site ↗
Machines › Easytech › ET-SM-HD-10000

Easytech ET-SM-HD-10000 specifications

Sheet and plate vacuum lifter Easytech ET-SM-HD-10000. Published specifications and the manufacturer's documents, in one reference. No prices: this is a reference, not a listing.

Illustration of a sheet and plate vacuum lifter with the Easytech logo, not a photo of this product. Easytech is a trademark of its owner.

Specifications

ConfigurationHeavy-Duty Horizontal Steel Plate Vacuum Lifter
Horizontal lifting load10000 kg (rated at 60% vacuum level; non-porous, dry, oil-free metal surfaces)
Measurement conditions60% vacuum level; non-porous, dry, oil-free metal surfaces
Compatible workpiece dimensions9000–12000 × 1500–3000 mm
Operating power supplyAC380 V
Pad dimensions840 × 430 mm
Number of pads12 pcs
Pad materialNitrile rubber (NBR)
Pump power2.2 kW
Maximum vacuum flow80 m³/h
Maximum vacuum level85% / −85 kPa
Equipment weight1850 kg
Vacuum grip / release controlManual valve and wireless remote
Remote control range≤ 50 m (project specification)
Vacuum alarmAudible and visual alarm below 60% vacuum or on power failure; independent rechargeable alarm battery
Vacuum retention specificationTime to fall from maximum vacuum to 60%: ≥15 min under project-specific conditions
Vacuum reservoirApproximately 5 L
Main beam length6000 mm
Crossbeam length2000 mm
Crane requirement15000 kg or higher crane class, subject to project installation requirements
Operating limitationsNo standing water, oil, sharp particles or corrosive surfaces
When using fewer padsDeactivating pads reduces load capacity; recalculation is required.

Source: Easytech (auto-easy.com), checked 2026-11-14

Figures are as the manufacturer publishes them for this configuration. Where a rated load carries a condition (vacuum level, surface, pad layout), the condition is part of the figure. Feature entries read "Yes" only where the manufacturer lists the feature; verify with the manufacturer for the model year. Guide: vacuum lifters for sheet and plate.

Manufacturer manuals and documents

Links open the document on the manufacturer's own website.

These specifications are compiled from manufacturer sources and are subject to verification and confirmation by the manufacturer for the actual machine or product. Options, control and build year can change what a particular machine has. Verify the most current specifications with the manufacturer on auto-easy.com.

Improve this reference