这些数字能证明什么
它们确立的是被识别为 Doosan PUMA SMX3100ST-LMT 的机床的已记录要价证据。它们并不能确立已完成的成交、运行状况、所有权、供货情况、随附刀具、币种、保修或最终议定金额。
如何缩小价值范围
请确认铭牌、确切的型号后缀、年份、数控系统、主轴与轴配置、运转小时数、选配件、维护记录、几何精度、运行证明以及全部拆除责任。
保留的型号规格
CAPACITY: Swing over bed 660 mm (25.98") Maximum bar capacity 102 mm (4.0") Swing over carriage 660 mm (25.98") Maximum turning diameter (Main Spindle) 660 mm (25.98") Maximum turning length 1,540 mm (60.63") Distance between left and right spindle nose 1,917 mm (75.47") Recommended chuck size (left / right spindle) 310 / 255 mm (12 / 10") LEFT SPINDLE: Spindle speed 3,000 rpm Spindle nose A2-11 Left spindle draw tube ID 103 mm (4.055") Spindle bore diameter 115 mm (4.52") AC spindle Motor (30 min. rating) 30 kW (40 hp) Maximum spindle torque (S2 30 min rating) 1,203 Nm (887 ft-lb) RIGHT SPINDLE: Spindle speed 40-4,000 rpm Spindle nose A2-8 Right spindle draw tube ID 82 mm (3.23") Right spindle hydraulic actuator ID 46 mm (1.81") Spindle bore diameter 91 mm (3.58") AC spindle Motor (S2 30 Min rating) 26 kW (35 hp) Maximum spindle torque (S3 25% ED) 621 Nm (458 ft-lbs) LEFT AND RIGHT SPINDLE C-AXIS: Minimum programmable angle (degrees) 0.001 degree Rapid traverse rate (RPM) 200 rpm MILLING SPINDLE: Spindle speed 12,000 rpm Motor power (S3 25% ED) 26 kW (35 hp) Maximum spindle torque (S3 10% ED) 124 Nm (91ft-lb) Tool index (2, 3 or 4 insert multi-tools) 15 degree B-axis (tilt) coupling increment Random angle B-axis travel 240 degree (+120 degree / -120 degree) B-axis minimum increment 0.0001 degree BED, SADDLE & CROSS SLIDE: Angle of slant bed 0 degree X1 (upper) axis travel 695 mm (27.36") Z1 (upper) axis travel 1,585 mm (62.4") X2 (lower) axis travel 235 mm (9.25") Z2 (lower) axis travel 1,540 mm (60.63") X1 axis rapid traverse rate 48 m/min (1,890 ipm) Z1 axis rapid traverse rate 48 m/min (1,890 ipm) Y-AXIS: Y-axis travel (total) 300 mm (±150mm) (11.81" (±5.9”)) Y-axis travel (above center) 150 mm (5.9") Y-axis travel (below center) 150 mm (5.9") Y-axis rapid traverse