数字が示すもの
Doosan PUMA SMX3100ST-LMTとして特定された機械の、記録された提示価格の根拠データです。成約、動作状態、所有権、在庫状況、付属工具、通貨、保証、最終的な交渉額を示すものではありません。
価値の絞り込み方
銘板、正確なサフィックス、年式、NC装置、主軸と軸の構成、稼働時間、オプション、整備履歴、精度（ジオメトリ）、動作確認、そして撤去に関するすべての義務を確認してください。
保持されているモデル仕様
CAPACITY: Swing over bed 660 mm (25.98") Maximum bar capacity 102 mm (4.0") Swing over carriage 660 mm (25.98") Maximum turning diameter (Main Spindle) 660 mm (25.98") Maximum turning length 1,540 mm (60.63") Distance between left and right spindle nose 1,917 mm (75.47") Recommended chuck size (left / right spindle) 310 / 255 mm (12 / 10") LEFT SPINDLE: Spindle speed 3,000 rpm Spindle nose A2-11 Left spindle draw tube ID 103 mm (4.055") Spindle bore diameter 115 mm (4.52") AC spindle Motor (30 min. rating) 30 kW (40 hp) Maximum spindle torque (S2 30 min rating) 1,203 Nm (887 ft-lb) RIGHT SPINDLE: Spindle speed 40-4,000 rpm Spindle nose A2-8 Right spindle draw tube ID 82 mm (3.23") Right spindle hydraulic actuator ID 46 mm (1.81") Spindle bore diameter 91 mm (3.58") AC spindle Motor (S2 30 Min rating) 26 kW (35 hp) Maximum spindle torque (S3 25% ED) 621 Nm (458 ft-lbs) LEFT AND RIGHT SPINDLE C-AXIS: Minimum programmable angle (degrees) 0.001 degree Rapid traverse rate (RPM) 200 rpm MILLING SPINDLE: Spindle speed 12,000 rpm Motor power (S3 25% ED) 26 kW (35 hp) Maximum spindle torque (S3 10% ED) 124 Nm (91ft-lb) Tool index (2, 3 or 4 insert multi-tools) 15 degree B-axis (tilt) coupling increment Random angle B-axis travel 240 degree (+120 degree / -120 degree) B-axis minimum increment 0.0001 degree BED, SADDLE & CROSS SLIDE: Angle of slant bed 0 degree X1 (upper) axis travel 695 mm (27.36") Z1 (upper) axis travel 1,585 mm (62.4") X2 (lower) axis travel 235 mm (9.25") Z2 (lower) axis travel 1,540 mm (60.63") X1 axis rapid traverse rate 48 m/min (1,890 ipm) Z1 axis rapid traverse rate 48 m/min (1,890 ipm) Y-AXIS: Y-axis travel (total) 300 mm (±150mm) (11.81" (±5.9”)) Y-axis travel (above center) 150 mm (5.9") Y-axis travel (below center) 150 mm (5.9") Y-axis rapid traverse