机床、附件及其关联。

The RPM check uses the main turning spindle. It does not describe the milling spindle, simultaneous axes or collision-free clearance.

• Resolve both spindle ratings, tool interfaces, axis configuration and workholding.
• Request simulation and a representative part trial for the exact configured machine.

These numeric checks use rectangular capacity at 90 degrees. Width and height maxima do not establish capacity at another angle or production rate.

• Confirm the stock profile, cutting angle, blade and feed strategy together.
• Review support rollers, length stop, minimum remnant and safe material handling.

Diameter is just one screening field. Optional diameter, module and axial-stroke configurations are not combined into a fictitious maximum machine.

• Obtain the exact module, hob, workholding, gear geometry and configuration limits.
• Define the required inspection method, quality acceptance and finishing route.

Axis travel is not proven hole depth, aspect ratio, diameter capability or accuracy. Some records contain family-summary travels only.

• Confirm electrode range, guide, workpiece material, hole depth and flushing requirements.
• Request a representative hole trial and verify feeder capacity for the selected electrode.

Nominal build volume is not guaranteed finished-part size. Support, orientation, extraction, washing and curing can impose smaller limits. A medical-sounding model name is not a process approval.

• Validate resin, supports, orientation, shrinkage and finished-part acceptance.
• Check extraction and wash/cure capacity separately. Form 4L has 350 mm nominal build height; the captured Wash L reference allows 296 mm maximum part height. No automatic workflow-fit test is performed.

Build volume does not establish strength, dimensional accuracy, material compatibility or throughput. The captured Prusa FAQ generations are not newer Plus or Gen2 machines.

• Confirm material, nozzle, chamber, orientation and support requirements.
• Verify exact generation, toolhead count, post-processing and part acceptance evidence.