Ganesh 5X8 Prices and Values by Year

Compare Ganesh 5X8 asking-price evidence by year, then verify the configuration and condition of the exact machine.

Also searched as: 5X8 5X-8 5X 8

Research a machine value →Browse asking-price records

1published records reviewed

1distinct year-and-price points

$59,500single observed ask

1model years represented

MODEL-SPECIFIC MARKET EVIDENCE

One published Ganesh 5X8 asking-price observation was recorded at $59,500.

One observation is a market signal, not a supported range. This page preserves the named machine and recorded ask without inventing additional values or applying a standard depreciation curve.

It is not the value of an unidentified unit. Year, control, configuration, hours, condition, options, location and transaction terms determine where an exact machine belongs.

Open the Ganesh 5X8 model record →Request value context

VALUES BY MODEL YEAR

Ganesh 5X8 asking-price evidence by year.

Calculations collapse exact duplicate year-and-price combinations so repeated records do not silently add weight. Every linked year has at least one published asking-price observation; one-point years are explicitly identified as limited evidence.

Published asking-price evidence; not completed-sale prices or appraised values.
Year	Records	Distinct prices	Low ask	Median ask	High ask
2017	1	1	$59,500	$59,500	$59,500

REPRESENTATIVE RECORDS

Open the observations behind the range.

This free CNC machine price guide context is strongest when you read the individual records instead of relying on one blended number.

Representative published asking-price records; open each record for its evidence boundary.
Machine record	Recorded ask	Retained details	Recorded status
2017 GANESH 5X8	$59,500	Mitsubishi Control · used · CA	Historical listing record

What the numbers establish

They establish recorded asking-price evidence for machines identified as Ganesh 5X8. They do not establish a completed sale, operating condition, ownership, availability, included tooling, currency, warranty or final negotiated amount.

How to narrow the value

Confirm the data plate, exact suffix, model year, control, spindle and axis configuration, hours, options, maintenance history, geometry, operating proof and all removal obligations.

Retained model specifications

Spindle Nose to Rotary Table Surface 2.11” - 15.62” 60 – 375mm Spindle Center to Z-axis way covers 17.71” 450mm (throat dimension) Platter Diameter Ø 8.34” Ø 210mm Center Bore Diameter Ø 40 H7 T-slot width / Number 12 H7 / 4, Hardened & ground table & T-slots Guide block width 18mm Maximum Work table Load 165 lbs 75kgs for rated accuracy Maximum Part Swing Ø12.5” Spindle Torque 50 ft-lb @ 1,500 rpm Tool Type CAT #40 Taper, BT #40 optional Spindle Taper Material / Hardness SCM415 / HRC 58-62 Retention System / Holding Capability Bellville Spring Stack 1650-1760 lbs Spindle Runout ? 0.000040” T.I.R Spindle Bearings - Front 95mm NSK 70BNR, 2-P4 class-7 bearings Spindle Bearings - Rear 95mm NSK 70BNR, 2-P4 class-7 bearings Cutting Feedrate 0.04 - 394 ipm 10,000 mm/min Axis Drive Motor Power – X, Y 2.7-HP (2.0kw nominal) Axis Drive Motor Power - Z 4.0-HP (3.0kw nominal) Ballscrews – X, Y, Z 32mm 12mm pitch Least Input Command Increment 0.0001” / 0.000040” 0.001mm / (40-millionths in metric) Tool Change Time 1.7-sec. tool-to-tool, Inverter Motor Driven Maximum Tool Diameter / w/adjacent tool 5.90” / 3.15” 150mm / 80mm Maximum Tool Length (from gage line) 11.81” 300mm Maximum Tool Weight 15 lbs. 7kg Tool Selection / Tool Access Random access Bi-directional shortest path Retention Knob (pull stud) C40-4502H (coolant), Japanese Standard Air Service Requirements 85 psi @ 14-scfm 20 Kg/cm 2 Connected Load Electrical Requirements 50 Amps 220vac ±5%, 60-Hz Coolant Capacity 68-gallons, 256 liters Shipping dimensions (W x D x H) 97” x 91” x 101” 246x229x256cm

COMMON QUESTIONS

Questions answered directly.

How much is a used Ganesh 5X8?

One published asking-price observation was recorded at $59,500. A single observation is not a supported market range, and an exact unit requires year, configuration and condition review.

Does the Ganesh 5X8 value use a depreciation curve?

No. The calculations use distinct published asking-price points retained in the MBB catalog.

Are these final sale prices?

No. They are asking-price observations. A completed transaction can differ because of condition, negotiation, fees, removal, tooling, location and other terms.

MOVE FROM RANGE TO DECISION

Research the exact machine.

Start with the model record, compare published asking prices, document condition and options, and account for every cost required to make the machine productive.

Request value context →Plan production-ready cost →