2017 GANESH 5X8 machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
About this 2017 GANESH 5X8 observation.
The catalog retained a used Vertical Machining Center record, CA and $59,500 as of August 8, 2021. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.
Compare the machine, not only the ad.
Use the persistent GANESH 5X8 model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
Evidence boundary for MBB-R-B9288F369E24.
- Record identity
- MBB-R-B9288F369E24 · MBB-owned public code
- Last catalog observation
- August 8, 2021
- Recorded source
- Source URL not retained in this public record
- Recorded asking price
- $59,500 · currency and terms not separately retained
- Recorded location
- CA
- Specification scope
- Source-recorded exact-unit fields; not independently verified
- Source-state label
- Historical listing record
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
- Originating source URL was not retained in this public record.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
Use this 2017 GANESH 5X8 record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
Know what happens after the machine is found.
Transfer this 2017 GANESH 5X8 record into the provider and preparation paths required to move, place, support and fund the equipment.
2017 GANESH 5X8 source-recorded specifications.
These fields were retained with the source record and have not been independently verified by MBB.
- Y Axis Travel
- 17.7 "
- X Axis Travel
- 12.6 "
- Z Axis Travel
- 14.9 "
- Spindle Motor
- 20 HP
- Spindle Speed
- 12000 RPM
- Spindle Taper
- 40
- Tool Changer
- 24 ATC
- Rapid Rate X Axis
- 1417 IPM
- Rapid Rate Y Axis
- 1417 IPM
- Rapid Rate Z Axis
- 944 IPM
- Max Table Load
- 165 LBS
- Weight
- 11245 LBS
Additional record details
X Axis Travel: 12.6" Y Axis Travel: 17.7" Z Axis Travel: 14.9" Rapid Rate X Axis: 1,417 IPM Rapid Rate Y Axis: 1,417 IPM Rapid Rate Z Axis: 944 IPM Max Table Load: 165 LBS Spindle Motor: 20 HP Spindle Speed: 12,000 RPM Spindle Taper: 40 CT Tool Changer: 24 ATC Spindle Nose to Rotary Table Surface 2.11” - 15.62” 60 – 375mm Spindle Center to Z-axis way covers 17.71” 450mm (throat dimension) Platter Diameter Ø 8.34” Ø 210mm Center Bore Diameter Ø 40 H7 T-slot width / Number 12 H7 / 4, Hardened & ground table & T-slots Guide block width 18mm Maximum Work table Load 165 lbs 75kgs for rated accuracy Maximum Part Swing Ø12.5” Spindle Torque 50 ft-lb @ 1,500 rpm Tool Type CAT #40 Taper, BT #40 optional Spindle Taper Material / Hardness SCM415 / HRC 58-62 Retention System / Holding Capability Bellville Spring Stack 1650-1760 lbs Spindle Runout ? 0.000040” T.I.R Spindle Bearings - Front 95mm NSK 70BNR, 2-P4 class-7 bearings Spindle Bearings - Rear 95mm NSK 70BNR, 2-P4 class-7 bearings Cutting Feedrate 0.04 - 394 ipm 10,000 mm/min Axis Drive Motor Power – X, Y 2.7-HP (2.0kw nominal) Axis Drive Motor Power - Z 4.0-HP (3.0kw nominal) Ballscrews – X, Y, Z 32mm 12mm pitch Least Input Command Increment 0.0001” / 0.000040” 0.001mm / (40-millionths in metric) Tool Change Time 1.7-sec. tool-to-tool, Inverter Motor Driven Maximum Tool Diameter / w/adjacent tool 5.90” / 3.15” 150mm / 80mm Maximum Tool Length (from gage line) 11.81” 300mm Maximum Tool Weight 15 lbs. 7kg Tool Selection / Tool Access Random access Bi-directional shortest path Retention Knob (pull stud) C40-4502H (coolant), Japanese Standard Air Service Requirements 85 psi @ 14-scfm 20 Kg/cm 2 Connected Load Electrical Requirements 50 Amps 220vac ±5%, 60-Hz Coolant Capacity 68-gallons, 256 liters Shipping dimensions (W x D x H) 97” x 91” x 101” 246x229x256cm Dimensions: 87" x 81" x 113" Weight: 11,245 LBS
Recorded options
These option names were recorded; installed, included and operating status is not established.