Independent machine researchA Delta Arc property ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
FLORIDA LEGAL SIZE & WEIGHT

Measure the load.
Then measure the vehicle.

Florida's statutory baseline is a screening point—not a substitute for the applicable statute, permit, bridge restriction or route analysis.

Primary sourcesFDOT and Florida Statutes
Route-specificConfiguration and road control
Local authorityMay require separate approval
Reviewed2026-09-28
DECISION SNAPSHOT

Start with the controlling facts.

This guide organizes official sources and machine-specific questions. It is not a permit, route approval, engineering analysis or legal opinion.

Width baseline102 inches under F.S. 316.515, subject to stated qualifications
Height baseline13 feet 6 inches, inclusive of load, for the general statutory rule
Weight baseline20,000 pounds on one axle and 80,000 pounds overall under the statutory framework
FLORIDA REQUIREMENTS

Use the numbers as permit triggers

  • Outside width includes the vehicle and load, subject to statutory exclusions and special provisions.
  • Height must include the trailer deck, blocking, machine, covers and anything above the machine.
  • Length rules vary by vehicle combination; do not apply one generic overall-length number to every configuration.
  • Weight legality depends on gross weight, individual axles, axle groups, spacing, tire loading, bridges and the route.
MACHINE-MOVE CONTEXT

Common measurement failures

  • Using the machine brochure height instead of loaded transport height
  • Ignoring pallets, skids, blocking, tarps, exhaust stacks or removable accessories
  • Treating machine weight as loaded gross vehicle weight
  • Estimating axle weights without a transport configuration or scale data
WORKFLOW

Turn the facts into a controlled move.

Every handoff should have a named owner, a source document and a stop-work condition.

Record OEM dimensions

Start with the exact model, year, options and published shipping data.

Document removals

List every component removed, separately crated or left attached.

Combine with trailer geometry

Add deck height, blocking, securement and the carrier's actual axle configuration.

Check the controlling sources

Use current Florida statutes, FDOT documents, bridge restrictions and the issued permit.

PRIMARY SOURCES

Verify the current rule at the source.

Dates, route restrictions, bridge conditions and permit procedures can change. Use the current official material for the actual movement.

Educational planning layer only.

Machine Blue Book does not issue permits, calculate a legal route, certify a carrier or decide whether a load is divisible. The applicant, carrier and governing authorities control those determinations.

FLORIDA PERMIT RESEARCH

Return to the complete Florida hub.

Connect dimensions, weights, routing, movement conditions, local authority and the receiving-site plan in one research path.