2021 YCM NFX400A machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
About this 2021 YCM NFX400A observation.
The catalog retained a used Vertical Machining Center record, no public location and $189,000 as of June 24, 2026. Its source-state label is “Source record marked active — verify.” None of those fields independently proves present availability.
Compare the machine, not only the ad.
Use the persistent YCM NFX400A model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
Evidence boundary for MBB-R-2CAA1F6BCB8B.
- Record identity
- MBB-R-2CAA1F6BCB8B · MBB-owned public code
- Last catalog observation
- June 24, 2026
- Recorded source
- Source URL not retained in this public record
- Recorded asking price
- $189,000 · currency and terms not separately retained
- Recorded location
- Location not published
- Specification scope
- Source-recorded exact-unit fields; not independently verified
- Source-state label
- Source record marked active — verify
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
- Originating source URL was not retained in this public record.
- Public machine location was not retained.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
Use this 2021 YCM NFX400A record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
Know what happens after the machine is found.
Transfer this 2021 YCM NFX400A record into the provider and preparation paths required to move, place, support and fund the equipment.
2021 YCM NFX400A source-recorded specifications.
These fields were retained with the source record and have not been independently verified by MBB.
- Spindle Speed
- 10012000 RPM
Additional record details
FANUC 31i-MB5+ Control X-Axis Travel: 650 mm / 25.59" Y-Axis Travel: 520 mm / 20.47" Z-Axis Travel: 480 mm / 18.89" A-Axis Travel: 150° (+30°/-120°) C-Axis Travel: 360° Spindle Speed: 100 to 12,000 RPM Power: 22kW / 30 HP (max), 11kW / 15 HP (S2 30 min), 7.5kW / 10 HP (cont.) Torque: 70 Nm / 51.6 ft-lb (S2 30 min), 47.8 Nm / 35.2 ft-lb (cont.) Taper: Big Plus CAT40 Chiller: Standard Table Type: Trunnion A/C C-Axis Diameter: ø350mm / ø13.77" C-Axis Rotation: 360° A-Axis Tilt: 150° (+30°/-120°) Load Capacity: 200kg / 440 lbs. Max Workpiece: ø400mm / ø15.74" diameter x 310mm / 12.2" deep ATC Capacity: 40 Tools Standard (60/90/120 optional) Tool-to-Tool: 1.8 sec Chip-to-Chip: 6.5 sec Max Tool Diameter: 76mm / 2.99" (all pockets full), 125mm / 4.92" (adjacent empty) Max Tool Length: 280mm / 11.02" | Max Tool Weight: 6kg / 13.2 lbs. Renishaw OMP400 Spindle Probe + TS27R Tool Setter Kinematics/AxiSet Calibration Package Jorgensen Chip Conveyor w/EcoFilter Smooth TCP (STCP) | Tilted Work Plane (TWP) 1000 PSI Coolant Through Spindle (Chip Blaster D30-70) Royal Mist Collector 5th Axis Workholding Package Central Auto-Oil Lubrication Utilities: Power: 220V / 3-Phase / 60Hz / 47 KVA / 123 AMP Breaker Air: 5.5 bar / 80 PSI minimum Coolant Tank: 118 US Gallons Dimensions & Weight: Machine Dimensions: 11.58' x 7.58' x 8.43' (L x W x H) Coolant Tank Dimensions: 9.19' x 3.12' x 4.76' (L x W x H) Floor Space: 2,160 x 3,450 x 3,150mm / 86" x 136" x 125" Gross Weight: 7,540kg / 16,623 lbs.
Recorded options
These option names were recorded; installed, included and operating status is not established.