Historical sold record
CNC Lathe · MBB-R-262BCC0C82E92003 TSUGAMI BS32C III
- Recorded asking price
- $44,900
- Recorded location
- MO
Historical listing recordCNC Lathe · MBB-R-379F0B80E8A0
2001 TSUGAMI BS32C III machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
Recorded asking price$89,900CA · Historical record · observed May 5, 2022
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Open model research →
Year2001
BrandTSUGAMI
ModelBS32C III
CategoryCNC Lathe
ControlFanuc
HoursNot published
ConditionUsed
MBB research recordMBB-R-379F0B80E8A0
SOURCE RECORD CONTEXT
About this 2001 TSUGAMI BS32C III observation.
The catalog retained a used CNC Lathe record, CA and $89,900 as of May 5, 2022. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.
TRANSFER THE RESEARCH
Compare the machine, not only the ad.
Use the persistent TSUGAMI BS32C III model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
MBB EVIDENCE CARD
Evidence boundary for MBB-R-379F0B80E8A0.
- Record identity
- MBB-R-379F0B80E8A0 · MBB-owned public code
- Last catalog observation
- May 5, 2022
- Recorded source
- Source URL not retained in this public record
- Recorded asking price
- $89,900 · currency and terms not separately retained
- Recorded location
- CA
- Specification scope
- Source-recorded exact-unit fields; not independently verified
- Source-state label
- Historical listing record
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
Unresolved before reliance
- Originating source URL was not retained in this public record.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
FROM RECORD TO DECISION
Use this 2001 TSUGAMI BS32C III record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
BEYOND THE LISTING
Know what happens after the machine is found.
Transfer this 2001 TSUGAMI BS32C III record into the provider and preparation paths required to move, place, support and fund the equipment.
RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS
2001 TSUGAMI BS32C III source-recorded specifications.
These fields were retained with the source record and have not been independently verified by MBB.
- Bar Capacity
- 1.25 "
- Spindle Speed
- 7000 RPM
- Spindle Motor
- 2.7 HP
- Max Turning Length
- 9.75 "
- Weight
- 6000 LBS
Additional record details
Bar Capacity: 1.25" Spindle Speed: 7,000 RPM Spindle Motor: 2.7 HP Max Turning Length: 9.75" Standard Axes: X1, Y1, Z1, C1, X2, Y2, Z2 Maximum Bar Diameter: 1 1/4" Z1-Axis Travel (synchronous to "Z2"): 9.75" Main Spindle: Spindle Speed: 200 to 7,000 rpm Indexing: Full C-Axis (.001 degree) Programmable Servo Axis Designations: "Z1" Main Headstock In and Out: 9.75" "T1" O.D. Tool Slide Up and Down: 11.6" "x1" O.D. Tool Slide Right and Left: 2.28" "X2" I.D. Tool Slide Up and Down: 8.66" Auxiliary Slide Motion: "Z2" I.D. Tool Slide In and Out: (synchronous to "Z1"): 7.88" Sub-Spindle Specifications: Maximum Diameter: 1 1/4" Maximum Drill Capacity - mild steel: .472" Maximum Tap Capacity - mild steel: .393" Speed Range (serial interface): 200 to 6,000 rpm Power Rating: 2.7 hp Sub-Spindle Indexing: 5 degree (C-Axis Opt) Part Ejection: front or rear ejection Horsepower of Main Spindle: 7.5 hp Driven Tool Drive Motor Rating: 1.5 hp Maximum Speed Cross Tool T10-T12: 200-5,000 rpm Maximum Speed Cross Tool T13: 120-3,000 rpm Number of Tool Stations: 6 OD, 5 ID, 3 ID/OD fixed BW tools 4 Cross Driven Tools, 2 Driven B/W Tooling Sizes, Turning: 5/8" square Dimensions: 88" x 60" x 87" Weight: 6,000 LBS
Recorded options
These option names were recorded; installed, included and operating status is not established.
TRANSFER THE SEARCH