2021 TORMACH PCNC770M machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
About this 2021 TORMACH PCNC770M observation.
The catalog retained a used Vertical Machining Center record, WA and $23,500 as of July 13, 2023. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.
Compare the machine, not only the ad.
Use the persistent TORMACH PCNC770M model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
Evidence boundary for MBB-R-661DFEC3F0B9.
- Record identity
- MBB-R-661DFEC3F0B9 · MBB-owned public code
- Last catalog observation
- July 13, 2023
- Recorded source
- Source URL not retained in this public record
- Recorded asking price
- $23,500 · currency and terms not separately retained
- Recorded location
- WA
- Specification scope
- Source-recorded exact-unit fields; not independently verified
- Source-state label
- Historical listing record
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
- Originating source URL was not retained in this public record.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
Use this 2021 TORMACH PCNC770M record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
Know what happens after the machine is found.
Transfer this 2021 TORMACH PCNC770M record into the provider and preparation paths required to move, place, support and fund the equipment.
2021 TORMACH PCNC770M source-recorded specifications.
These fields were retained with the source record and have not been independently verified by MBB.
- Y Axis Travel
- 14 "
- X Axis Travel
- 7.5 "
- Z Axis Travel
- 13.25 "
- Spindle Motor
- 1.5 HP
- Spindle Speed
- 10000 RPM
- Spindle Taper
- 8
- Max Table Load
- 500 LBS
- Weight
- 950 LBS
Additional record details
Y Axis Travel: 14" X Axis Travel: 7.5" Z Axis Travel: 13.25" Spindle Motor: 1.5 HP Spindle Speed: 10,000 RPM Spindle Taper: R8 CT Maximum Feed Rate X- and Y-Axis: 135 IPM (3.43 m/min) Z-Axis: 110 IPM (2.79 m/min) Primary Power Required: Single-Phase 115 Vac, 50/60 Hz, 15A breaker Table Slots: 5/8" - Three slots (15.9 mm - Three slots) Spindle Nose to Table Max. Clearance: 13.25" (337 mm) Spindle Centerline to Machine Column: 8.6" (218 mm) Thread Machining: Tension/Compression Auto Reversing Thread Mill Control Powered by PathPilot by Tormach - Support for up to 4-axis continuous machining - Intuitive conversational programming - 80 GB of system program memory - Built-in Dropbox™ support for seamlessly transferring programs Table Size: 26" x 8" Dimensions: 56" x 48.5" x 88" Weight: 950 LBS Max Table Load: 500 LBS
Recorded options
These option names were recorded; installed, included and operating status is not established.