INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Historical listing recordRouter · MBB-R-2A800B1A8FE6

2020 SHOPSABRE RC8 machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Request source verification →Generate research briefResearch SHOPSABRE RC8
Recorded asking price$34,900Location not published · Historical record · observed April 13, 2022
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Open model research →
Year2020
BrandSHOPSABRE
ModelRC8
CategoryRouter
ControlShopsabre Computer System
HoursNot published
ConditionUsed
MBB research recordMBB-R-2A800B1A8FE6
SOURCE RECORD CONTEXT

About this 2020 SHOPSABRE RC8 observation.

The catalog retained a used Router record, no public location and $34,900 as of April 13, 2022. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent SHOPSABRE RC8 model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-2A800B1A8FE6.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-2A800B1A8FE6 · MBB-owned public code
Last catalog observation
April 13, 2022
Recorded source
Source URL not retained in this public record
Recorded asking price
$34,900 · currency and terms not separately retained
Recorded location
Location not published
Specification scope
No structured specification evidence retained
Source-state label
Historical listing record
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Originating source URL was not retained in this public record.
  • Public machine location was not retained.
  • No structured exact-unit or model-reference specifications were retained.
  • Installed and included options are unknown.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2020 SHOPSABRE RC8 record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Find a current comparableBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2020 SHOPSABRE RC8 record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2020 SHOPSABRE RC8 model-reference specifications.

No structured specifications were retained for this record. Use the model research page and verify the exact machine configuration.

Additional record details

Table Bed Cut Area (X Axis by Y Axis): 55” x 97” without ATC or 51” x 97” with ATC option Gantry Clearance: 8” Standard Maximum Travel Speeds on X & Y: 1500IPM with Servo Option (CUT SPEEDS WILL VARY) Maximum Travel Speeds on Z: 500IPM as quoted Z Travel: 9” Machine Weight: 2100 lbs. Machine Foot Print (Including Gantry): 89” x 132” x 80” Machine Structure: Steel Tube Frame- Welded Gantry Structure: Large Structural Tube Steel Bridge with Tube Steel Uprights X & Y Axis Drive System: Rack and Pinion with Dual Y Axis and Single X Axis – Includes ShopSabre Floating Drive Technology and over-sized Rack Gears and Rack with Planetary Gear Drives Z Axis Drive System: Center Driven Anti-Backlash Harden Steel Ball Screw by THK/HiWin Bearing System: 25MM Linear Guide Rails and Bearings with Quad Roller Sets and Triple Seal by THK/HiWin Controller: ShopSabre WINCNC Advanced Controller PC System: Included with Solid State Hard Drive and PCI Controller Board Installed Networkable: Yes PC to PC Connectivity for Diagnosis and Training: Yes Software: Vectric Tech Support: Included – Life-time Controller Software Updates: Included Manufacturer: United States – ShopSabre Facility – Lakeville, Minnesota 55044 Life-Time Tech Support (Phone/Email/PC2PC)

TRANSFER THE SEARCH

Related SHOPSABRE RC8 records.