2017 SHARP SVL2416SM machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
About this 2017 SHARP SVL2416SM observation.
The catalog retained a used Vertical Machining Center record, CA and $17,000 as of November 5, 2025. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.
Compare the machine, not only the ad.
Use the persistent SHARP SVL2416SM model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
Evidence boundary for MBB-R-368A90BCF0B4.
- Record identity
- MBB-R-368A90BCF0B4 · MBB-owned public code
- Last catalog observation
- November 5, 2025
- Recorded source
- Source URL not retained in this public record
- Recorded asking price
- $17,000 · currency and terms not separately retained
- Recorded location
- CA
- Specification scope
- No structured specification evidence retained
- Source-state label
- Historical listing record
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
- Originating source URL was not retained in this public record.
- No structured exact-unit or model-reference specifications were retained.
- Installed and included options are unknown.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
Use this 2017 SHARP SVL2416SM record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
Know what happens after the machine is found.
Transfer this 2017 SHARP SVL2416SM record into the provider and preparation paths required to move, place, support and fund the equipment.
2017 SHARP SVL2416SM model-reference specifications.
No structured specifications were retained for this record. Use the model research page and verify the exact machine configuration.
Additional record details
24" x 16" x 18" travel Linear way construction 1890 in/min (48M / min) rapid traverse 10,000 rpm, CAT 40 spindle 10 tools carousel type ATC Siemens 828D PPU240.2 control, 8.4" LCD display Small footprint Specifications: Work Capacity: Travel X,Y,Z: 24" x 16" x 18.1" (610mm x 356mm x 460mm) Spindle Nose to Table: 7.9 - 23.6" (200mm - 600mm) Spindle Center to Column: 17" (432mm) Work Table: Table Area: 27.5" x 16.5" (700mm x 420mm) Spindle: Spindle Taper: CAT 40 Spindle Max. Speed: 10,000 rpm Driving Type: Belt Drive Motor (30m/cont.): 9.3/10.7 (7/8 kW) Automatic Tool Changer (ATC): Magazine Type: Carousel Magazine Capacity: 10 Tool Selection Type: Set Tool Number Max. Tool Diameter: 4.3" (110mm) W/O Adj. Tool, Max. Dia: 6.7" (170mm) Max Tool Length: 7.9" (200mm) Max Tool Weight: 13.2lbs (6 Kg) Air Blast at Tool Change: Standard Motion: Cutting Feed Rate: 0.04-393.7 ipm (1-10,000 mm/m) Rapid Traverse: X/Y/Z - 1,890 ipm (48,000 mm/m) Accuracy: Positioning Accuracy: 0.00016/0.004 inch Repeatability Accuracy: 0.00012/0.003 inch(mm) CNC Control Features: Controller: Siemens Control Model: 828D-240.2 Programming Assist: "ShopMill-Conversational Type" 4th Axis Support: Optional Screen Size: 8.4 Coolant System: Flood Coolant Nozzles: 2 Coolant Tank Capacity: 42 Gal. (160 L) Chip Pan: Standard Power Requirement: Electrical: 220V (w/ transformer) /3 Phase/ 20 KVA/60 Hz Air: 6 CFM @ 88 psi Machine Measurements: Floor Space: 72.8" x 85" x 91.5" Floor Space (w/ side mount) 78.2" x 85" x 91.5" Door Opening: 25" (635M) Weight: 7,260 lbs. (3,300) Standard Equipment: Siemens 828D-PPU241.2 control & drives with ; USB port, 2560m (1MB) memory, Embedded Ethernet, RS-232C interface, 50 blocks look ahead, 4 additional M codes, M30 Auto Power OFF Siemens "ShopMill-ConversationalType Programming" Full metal enclosure w/ 2 large side doors Coolant system w/ enlarged coolant tank Coolant Gun Auto lubrication system Rigid Tapping Air Gun Removable electronic hand wheel (MPG) Door Interlock Chip pan Air Accumulator Heat Exchanger for Electric Cabinet Fluorescent work light Optional Accessories: (Please call for pricing and additional information) 4th Axis kit prepped (electrics, cables unit) 4th Axis with rotary table (complete with drives, motor) Flat Type Chip Conveyor Oil skimmer Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics) CTS 20 bar (300 psi) pump with tank Tool Probe (Renishaw TS27R) Tool Setter (Renishaw OMP40)