Historical listing record
Vertical Machining Center · MBB-R-F6AE8E86C7812017 OKUMA MU8000VL
- Recorded asking price
- $498,000
- Recorded location
- Not published
Historical listing recordVertical Machining Center · MBB-R-6BE39DE3B12A
2017 OKUMA MU8000VL machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
Recorded asking price$499,000Location not published · Historical record · observed April 30, 2025
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Verify at source →
Year2017
BrandOKUMA
ModelMU8000VL
CategoryVertical Machining Center
ControlNot published
HoursNot published
ConditionUsed
MBB research recordMBB-R-6BE39DE3B12A
SOURCE RECORD CONTEXT
About this 2017 OKUMA MU8000VL observation.
The catalog retained a used Vertical Machining Center record, no public location and $499,000 as of April 30, 2025. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.
TRANSFER THE RESEARCH
Compare the machine, not only the ad.
Use the persistent OKUMA MU8000VL model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
MBB EVIDENCE CARD
Evidence boundary for MBB-R-6BE39DE3B12A.
- Record identity
- MBB-R-6BE39DE3B12A · MBB-owned public code
- Last catalog observation
- April 30, 2025
- Recorded source
- ebay.com
- Recorded asking price
- $499,000 · currency and terms not separately retained
- Recorded location
- Location not published
- Specification scope
- Source-recorded exact-unit fields; not independently verified
- Source-state label
- Historical listing record
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
Unresolved before reliance
- Public machine location was not retained.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
FROM RECORD TO DECISION
Use this 2017 OKUMA MU8000VL record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
BEYOND THE LISTING
Know what happens after the machine is found.
Transfer this 2017 OKUMA MU8000VL record into the provider and preparation paths required to move, place, support and fund the equipment.
RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS
2017 OKUMA MU8000VL source-recorded specifications.
These fields were retained with the source record and have not been independently verified by MBB.
- Y Axis Travel
- 21.65 "
- X Axis Travel
- 39.37 "
- Z Axis Travel
- 23.62 "
- Spindle Motor
- 22 HP
- Spindle Speed
- 15000 RPM
- Spindle Taper
- 100
- Tool Changer
- 48 ATC
- Rapid Rate X Axis
- 1968 IPM
- Rapid Rate Y Axis
- 1968 IPM
- Rapid Rate Z Axis
- 1968 IPM
- Max Table Load
- 1540 LBS
Additional record details
X Axis Travel: 39.37" Y Axis Travel: 21.65" Z Axis Travel: 23.62" Spindle Motor: 22 HP Spindle Speed: 15,000 RPM Spindle Taper: HSK100 Tool Changer: 48 ATC Rapid Rate X Axis: 1,968 IPM Rapid Rate Y Axis: 1,968 IPM Rapid Rate Z Axis: 1,968 IPM Max Table Load: 1,540 LBS A Axis Travel: +90 to -90 (degrees) C Axis Travel: 360 (degrees) Table Surface to Spindle Nose: 7.87" to 31.50" Max Work Size: 39.37" x 21.65" Floor to Table Top: 47.64" Max Tool Diameter: 3.94"/5.98" Max Tool Length: 15.75" Max Tool Weight: 26.4 LBS Okuma OSP-P3005A-H CNC Control 5 Axis Simultaneous Machining Programmable Swiveling Trunnion Table 15,000 RPM High Speed Spindle 48 Station Automatic Tool Changer HSK-A100 Spindle Taper Turning Operation Up to 800 RPM on C Axis Blum Tool Break detection Auto Gauging Gear Cutting Pkg Laser Oscillation Device 4KW – TruDisk 4002 for Additive Machining (Machine Can Be Used With or Without Laser Device) Powder Nozzles, Powder Feed unit, Powder Conveyor Chiller for Laser Oscillation Device Dust Proof for Axis Dynamic Fixture Offset Riedel Chiller & Dust Collection Chip Conveyor with Right Side Disposal Coolant System ***New Price of this machine was $1.8M*** Running hours- 11840:02 Operating hours- 1356:01 Cutting hours- 1115:26 Not operating hours- 10483:56 Spindle run hours- 1231:27 (Machine Can Be Used With or Without Laser Device)
Recorded options
These option names were recorded; installed, included and operating status is not established.
TRANSFER THE SEARCH