INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Historical listing recordCNC Lathe · MBB-R-E179F0D27972

2018 OKUMA GENOS L250II-E machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Open recorded source ↗Generate research briefResearch OKUMA GENOS L250II-E
Recorded asking price$55,000Location not published · Historical record · observed April 16, 2026
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Verify at source →
Year2018
BrandOKUMA
ModelGENOS L250II-E
CategoryCNC Lathe
ControlNot published
HoursNot published
ConditionUsed
MBB research recordMBB-R-E179F0D27972
SOURCE RECORD CONTEXT

About this 2018 OKUMA GENOS L250II-E observation.

The catalog retained a used CNC Lathe record, no public location and $55,000 as of April 16, 2026. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent OKUMA GENOS L250II-E model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-E179F0D27972.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-E179F0D27972 · MBB-owned public code
Last catalog observation
April 16, 2026
Recorded source
ebay.com
Recorded asking price
$55,000 · currency and terms not separately retained
Recorded location
Location not published
Specification scope
Source-recorded exact-unit fields; not independently verified
Source-state label
Historical listing record
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Public machine location was not retained.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2018 OKUMA GENOS L250II-E record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Find a current comparableBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2018 OKUMA GENOS L250II-E record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2018 OKUMA GENOS L250II-E source-recorded specifications.

These fields were retained with the source record and have not been independently verified by MBB.

Bar Capacity
2 "
Chuck Size
8 "
Spindle Speed
3800 RPM

Additional record details

Bar Capacity: 2" Chuck Size: 8" Spindle Speed: 3,800 RPM Swing: 17.7in Turning Diameter: 8.66in Distance Between Centers: 18.5in Turret: 12 Station Chip Removal: Chip Conveyor max work length: 500mm spindle nose: JIS A2-6 turret type: NC V8 number of tools: 8 OD tool shank size: 25x25mm ID tool shank dia: 40mm feedrate X: 25min-1(rpm) feedrate Z: 30min-1(rpm) speed range: 11,000,000 tailstock quill diameter: 90mm tapered bore type: MT.5 (revolving center) quill travel: 100mm coolant pump motor: 0.8kW machine height: 1619mm floor space: 2076×1832mm machine weight: 3,800kg CNC control: OSP-P300LA-e Turning Diameter: 8.66in Control: Okuma OSP P300L CNC Distance Between Centers: 18.5in Turret: 12 Station Chip Removal: Chip Conveyor Equipped With: Auto Tool Presetter, Parts Catcher, Tailstock, Barfeed Included max turn diameter: 280mm max work length: 290mm x axis rapid traverse: 25mm/min z axis rapid traverse: 30mm/min spindle nose: JIS A2-6 motor power: 7.5/5.5kW turret type: NC V8 no. of tools: 8 machine height: 1620mm floor space: 1482 x 1843mm weight: 2,900kg machine weight: 3,500kg

Recorded options

These option names were recorded; installed, included and operating status is not established.

Parts CatcherTailstockTool Presetter
TRANSFER THE SEARCH

Related OKUMA GENOS L250II-E records.