Source record marked active — verify
Horizontal Machining Center · MBB-R-1462D71881AB2017 KIWA KMH300A
- Recorded asking price
- $24,000
- Recorded location
- CA
Source record marked active — verifyHorizontal Machining Center · MBB-R-D14CDF24958B
2018 KIWA KMH300A machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
Recorded asking price$179,500Location not published · Availability unconfirmed · observed December 6, 2024
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Verify at source →
Year2018
BrandKIWA
ModelKMH300A
CategoryHorizontal Machining Center
ControlFanuc O-M
HoursNot published
ConditionUsed
MBB research recordMBB-R-D14CDF24958B
SOURCE RECORD CONTEXT
About this 2018 KIWA KMH300A observation.
The catalog retained a used Horizontal Machining Center record, no public location and $179,500 as of December 6, 2024. Its source-state label is “Source record marked active — verify.” None of those fields independently proves present availability.
TRANSFER THE RESEARCH
Compare the machine, not only the ad.
Use the persistent KIWA KMH300A model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
MBB EVIDENCE CARD
Evidence boundary for MBB-R-D14CDF24958B.
- Record identity
- MBB-R-D14CDF24958B · MBB-owned public code
- Last catalog observation
- December 6, 2024
- Recorded source
- clarkmachinerysales.com
- Recorded asking price
- $179,500 · currency and terms not separately retained
- Recorded location
- Location not published
- Specification scope
- Model-reference baseline; exact-unit values unknown
- Source-state label
- Source record marked active — verify
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
Unresolved before reliance
- Public machine location was not retained.
- Exact-unit specifications are unknown; displayed specifications are model-reference baselines.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
FROM RECORD TO DECISION
Use this 2018 KIWA KMH300A record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
BEYOND THE LISTING
Know what happens after the machine is found.
Transfer this 2018 KIWA KMH300A record into the provider and preparation paths required to move, place, support and fund the equipment.
RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS
2018 KIWA KMH300A model-reference specifications.
These are model-level reference facts, not proof of this exact unit. Verify the year, control, options and installed configuration.
- X Axis Travel
- 18.1 "
- Y Axis Travel
- 18.1 "
- Z Axis Travel
- 13.7 "
- Spindle Speed
- 12000.0 RPM
- Spindle Motor
- 20.0 HP
- Tool Changer
- 30.0 ATC
Additional record details
PALLET WIDTH: 320.04 mm PALLET LENGTH: 320.04 mm PALLET INDEXING: FULL 4TH NUMBER OF PALLETS: 6 TABLE LENGTH: 320.04 mm TABLE WIDTH: 320.04 mm MAX WORKPIECE WEIGHT: 249.9 kg X-AXIS TRAVEL: 459.74 mm Y-AXIS TRAVEL: 459.74 mm Z-AXIS TRAVEL: 347.98 mm SPINDLE SPEED: 12,000 RPM SPINDLE MOTOR: 14.9 kW SPINDLE TAPER: CAT 40 TOOL POSITIONS (ATC): 120 RAPID TRAVERSE RATE: 4,998.7 cm/min. CUTTING FEEDRATE: 1,200.1 cm/min. FANUC Oi-MF CNC CONTROL RENISHAW LASER TOOL DETECTION & TOOL SETTING PROBE HIGH PRESSURE THROUGH SPINDLE COOLANT (500 PSI) 12,000 RPM SPINDLE CHIP CONVEYOR COOLANT SYSTEM (6) TOMBSTONES ETHERNET USB (30) TOOL HOLDERS INCLUDED** ORIGINAL OWNER ** MACHINE CUTTING PRIMARILY ALUMINUM ** AS AUGUST, 2024 - CUTTING TIME HOURS: 2,300** MACHINE MANUFACTURED DATE: SEPTEMBER, 2018 ** IN PLANT, UNDER POWER, READY FOR IMMEDIATE INSPECTION & PURCHASE
Recorded options
These option names were recorded; installed, included and operating status is not established.
TRANSFER THE SEARCH