INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Historical listing recordVertical Machining Center · MBB-R-4813C74F76C4

2014 HURCO VM10I machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Request source verification →Generate research briefResearch HURCO VM10I
Recorded asking price$46,900Location not published · Historical record · observed February 29, 2024
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Open model research →
Year2014
BrandHURCO
ModelVM10I
CategoryVertical Machining Center
ControlHurco MAX
HoursNot published
ConditionUsed
MBB research recordMBB-R-4813C74F76C4
SOURCE RECORD CONTEXT

About this 2014 HURCO VM10I observation.

The catalog retained a used Vertical Machining Center record, no public location and $46,900 as of February 29, 2024. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent HURCO VM10I model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-4813C74F76C4.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-4813C74F76C4 · MBB-owned public code
Last catalog observation
February 29, 2024
Recorded source
Source URL not retained in this public record
Recorded asking price
$46,900 · currency and terms not separately retained
Recorded location
Location not published
Specification scope
Source-recorded exact-unit fields; not independently verified
Source-state label
Historical listing record
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Originating source URL was not retained in this public record.
  • Public machine location was not retained.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2014 HURCO VM10I record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Find a current comparableBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2014 HURCO VM10I record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2014 HURCO VM10I source-recorded specifications.

These fields were retained with the source record and have not been independently verified by MBB.

Y Axis Travel
16 "
X Axis Travel
26 "
Z Axis Travel
20 "
Spindle Motor
15 HP
Spindle Speed
10000 RPM
Spindle Taper
40
Tool Changer
24 ATC
Max Table Load
3300 LBS
Weight
6200 LBS

Additional record details

Table Size: 30" x 16" Max Table Load: 3,300 LBS X Axis Travel: 26" Y Axis Travel: 16" Z Axis Travel: 20" Spindle Nose to Table: Min.Max. 4" / 24" Rapid Rate X,Y,Z Axes: 1,102 IPM Spindle Speed: 10,000 RPM Spindle Motor: 15 HP Spindle Taper: CAT40 Tool Changer: 24 ATC Max Tool Diameter: 3.5" Max Tool Length: 9.8" Max Tool Weight: 15.4 lbs Equipped With: Hurco MAX CNC Control USB & RS-232 Port Leveling pads Coolant Tank & Pump Coolant & Air Sprayer Nozzles Machine is wired for 230 volt / 3 phase / 60 H.Z. Control Options Included- Advanced Verification Graphic. NC Productivity Package, Industry Standard NC, ULTIPOCKETS, Insert Pockets, Rigid Tapping, Helical Ramp, 3D Mold, Swept Surface, Select Surface Finish Quality, Tool & Material Library, Ulti-motion, Tool Change Optimization. Prototype Facility, Low Hours, Under Power! Dimensions: 126" x 115" x 99" Weight: 6,200 LBS

Recorded options

These option names were recorded; installed, included and operating status is not established.

Programmable Coolant
TRANSFER THE SEARCH

Related HURCO VM10I records.