2001 HITACHI SEIKI HG630 machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
About this 2001 HITACHI SEIKI HG630 observation.
The catalog retained a used Horizontal Machining Center record, no public location and $29,500 as of January 7, 2022. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.
Compare the machine, not only the ad.
Use the persistent HITACHI SEIKI HG630 model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
Evidence boundary for MBB-R-B46C18D6AE50.
- Record identity
- MBB-R-B46C18D6AE50 · MBB-owned public code
- Last catalog observation
- January 7, 2022
- Recorded source
- Source URL not retained in this public record
- Recorded asking price
- $29,500 · currency and terms not separately retained
- Recorded location
- Location not published
- Specification scope
- Source-recorded exact-unit fields; not independently verified
- Source-state label
- Historical listing record
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
- Originating source URL was not retained in this public record.
- Public machine location was not retained.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
Use this 2001 HITACHI SEIKI HG630 record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
Know what happens after the machine is found.
Transfer this 2001 HITACHI SEIKI HG630 record into the provider and preparation paths required to move, place, support and fund the equipment.
2001 HITACHI SEIKI HG630 source-recorded specifications.
These fields were retained with the source record and have not been independently verified by MBB.
- X Axis Travel
- 32.3 "
- Y Axis Travel
- 31.5 "
- Z Axis Travel
- 31.5 "
- Spindle Speed
- 10000 RPM
- Spindle Motor
- 40 HP
- Tool Changer
- 60 ATC
- Max Pallet Load
- 2640 LBS
- Weight
- 36800 LBS
Additional record details
X Axis Travel: 32.3" Y Axis Travel: 31.5" Z Axis Travel: 31.5" Rapid Rate X Axis: 0 IPM Rapid Rate Y Axis: 0 IPM Rapid Rate Z Axis: 0 IPM Pallet Size: 36.36" x 41.3"" Max Pallet Load: 2640 LBS Spindle Speed: 10,000 RPM Spindle Motor: 40 HP Tool Changer: 60 ATC 264 Ft. of Memory and Fanuc Servo Motors and Drives Standard Axes Travels: “X” – 32.3”, “Y” – 31.5”, “Z” – 31.5” Table Length: 630mm x630mm Table Center to Spindle Nose – 150mm (5.9”) to 950mm (37.4”) Table Surface to Spindle Nose – 100mm (3.9”) to 900mm (35.4”) 60 Tool – Automatic Tool Changer Magazine U.T.S. Probe System – Basic Function Level (need to confirm installed) 40 H.P. Main Spindle Motor (50% E.D.) 100 – 10,000 R.P.M. Spindle Range – Full H.P. at 465 RPM A.T.C. Tool Size is 4.9” Dia. By 19.7” Long by 44 Lbs. – Adjacent Tool Max. A.T.C. Tool Size is 9.65” Dia. By 19.7” Long by 44 Lbs. Positioning Accuracy - +.00015”/All Axes Full Stroke Repeatability - +.00008”/All Axes Full Stroke 1 degree Table Index (360 degrees total) 99 Tool Length or Diameter Offsets & 6 Work Offsets (G54-G59) Direct Tapping Function Manual Portable Pulse Generator Max. Weight on Pallet – 2640 lbs. Rapid Traverse: 1,772 I.P.M. – All Axes Spindle Speed Over-Ride to 200% of Programmed Speeds. Feedrate Over-Ride to 200% of Programmed Feeds Lock out to 120% Helical Interpolation – Thread Milling (3 Axis Control) Auto Power Cut-off Device – Shuts Machine off at End of Program Maximum Work Area 36.6” x 41.3” Height Macro “B” 100 Variable – Programming Language Chip conveyer with coolant tank system (o.e.m.) Coolant thru spindle equipped from Factory 2 pallet machine with Hyd. Automatic Pallet changer equipped Machine Weight with A.P.C and A.T.C Mechanisms – 36,800 Lbs Weight: 36,800 LBS
Recorded options
These option names were recorded; installed, included and operating status is not established.