INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Historical listing recordVertical Machining Center · MBB-R-BC2724118A5C

2019 HAAS VM6 machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Open recorded source ↗Generate research briefResearch HAAS VM6
Recorded asking pricePrice not publishedLocation not published · Historical record · observed October 2, 2025
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Verify at source →
Year2019
BrandHAAS
ModelVM6
CategoryVertical Machining Center
ControlNot published
HoursNot published
ConditionUsed
MBB research recordMBB-R-BC2724118A5C
SOURCE RECORD CONTEXT

About this 2019 HAAS VM6 observation.

The catalog retained a used Vertical Machining Center record, no public location and Price not published as of October 2, 2025. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent HAAS VM6 model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-BC2724118A5C.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-BC2724118A5C · MBB-owned public code
Last catalog observation
October 2, 2025
Recorded source
clarkmachinerysales.com
Recorded asking price
Price not published
Recorded location
Location not published
Specification scope
Model-reference baseline; exact-unit values unknown
Source-state label
Historical listing record
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Asking price, currency and commercial terms are not published.
  • Public machine location was not retained.
  • Exact-unit specifications are unknown; displayed specifications are model-reference baselines.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2019 HAAS VM6 record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Find a current comparableBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2019 HAAS VM6 record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2019 HAAS VM6 model-reference specifications.

These are model-level reference facts, not proof of this exact unit. Verify the year, control, options and installed configuration.

Y Axis Travel
32.0 "
X Axis Travel
64.0 "
Z Axis Travel
30.0 "
Spindle Motor
30.0 HP
Spindle Speed
12000.0 RPM
Spindle Taper
40.0
Tool Changer
24.0 ATC
Rapid Rate X Axis
540.0 IPM
Rapid Rate Y Axis
600.0 IPM
Rapid Rate Z Axis
600.0 IPM
Max Table Load
4000.0 LBS
Weight
24000.0 LBS

Additional record details

TABLE LENGTH: 1,625.6 mm TABLE WIDTH: 711.2 mm X-AXIS TRAVEL: 1,625.6 mm Y-AXIS TRAVEL: 812.8 mm Z-AXIS TRAVEL: 762 mm SPINDLE SPEED: 12,000 RPM SPINDLE MOTOR: 22.4 kW SPINDLE TAPER: HSK-A63 TOOL CAPACITY (ATC): 30 ROTARY OR TRUNNION: Yes HAAS NEXTGEN CONTROL HAAS TR200Y TRUNNION TABLE 4TH AXIS DRIVE & WIRING 5TH AXIS DRIVE & WIRING HIGH-PRESSURE THROUGH-SPINDLE COOLANT (1,000 PSI) RENISHAW WIRELESS INTUITIVE PROBING SYSTEM (WIPS) SIDE-MOUNT TOOL CHANGER (30 ATC) 12,000 RPM (HSK-A63 TAPER) LINEAR SCALES MINIMUM QUANTITY LUBRICATION SYSTEM AUXILIARY COOLANT FILTRATION SYSTEM PROGRAMMABLE COOLANT THROUGH-TOOL AIR BLAST WINDOW AIR BLAST AUTO AIR GUN HIGH-INTENSITY LIGHTING REMOTE JOG HANDLE CHIP TRAY FILTER KIT CHIP AUGER DYNAMIC WORK OFFSETS & TOOL CENTER POINT CONTROL VISUAL PART PROGRAMMING SYSTEM (VPS EDITING) COORDINATE ROTATION & SCALING MEDIA DISPLAY M-CODE (M130) SECOND HOME POSITION HIGH-SPEED MACHINING SPINDLE ORIENTATION RIGID TAPPING MACROS USB PORT ETHERNET 32GB EXPANDED MEMORY HAASCONNECT: REMOTE MONITORING WIFI CONNECTIVITY WIFI CAMERA INTERNAL HIGH-VOLTAGE TRANSFORMER (MACHINE SET-UP TO RUN ON 440V)** AS OF MAY 2025, FEED CUTTING TIME 2,689 HOURS ** MACHINE CUT PRIMARILY ALUMINUM ** FULL REPLACEMENT COST, AS EQUIPPED - $290,000 ** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCASE** GLASS FOR THE LEFT FRONT DOOR IS BROKEN ** MACHINE AVAILABLE TO BE SOLD WITH OR WITHOUT THE TR200Y TRUNNION TABLE

Recorded options

These option names were recorded; installed, included and operating status is not established.

Programmable Coolant
TRANSFER THE SEARCH

Related HAAS VM6 records.