INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Source record marked active — verifyVertical Machining Center · MBB-R-1A6FC121FBBB

2004 HAAS VF6-50 machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Open recorded source ↗Generate research briefResearch HAAS VF6-50
Recorded asking price$39,500Location not published · Availability unconfirmed · observed May 9, 2025
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Verify at source →
Year2004
BrandHAAS
ModelVF6-50
CategoryVertical Machining Center
ControlHAAS CNC Control
HoursNot published
ConditionUsed
MBB research recordMBB-R-1A6FC121FBBB
SOURCE RECORD CONTEXT

About this 2004 HAAS VF6-50 observation.

The catalog retained a used Vertical Machining Center record, no public location and $39,500 as of May 9, 2025. Its source-state label is “Source record marked active — verify.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent HAAS VF6-50 model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-1A6FC121FBBB.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-1A6FC121FBBB · MBB-owned public code
Last catalog observation
May 9, 2025
Recorded source
machinesused.com
Recorded asking price
$39,500 · currency and terms not separately retained
Recorded location
Location not published
Specification scope
Source-recorded exact-unit fields; not independently verified
Source-state label
Source record marked active — verify
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Public machine location was not retained.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2004 HAAS VF6-50 record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Verify this sourceBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2004 HAAS VF6-50 record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2004 HAAS VF6-50 source-recorded specifications.

These fields were retained with the source record and have not been independently verified by MBB.

Spindle Taper
50

Additional record details

Table Size: 64" x 28" Machine Travels (X/Y/Z): 64" x 32" x 30" Table Capacity: 4,000 lbs Spindle Taper: CAT-50 Taper Spindle Speeds: 7,500 Max RPM Transmission: 2-Speed Gearbox Rapid Traverse Rate (X/Y/Z): 540 IPM on X, 600 IPM Y and Z Maximum Cutting Feed Rate: 500 IPM Tool Changer Style: Side Mount Tool Changer, Twin Arm Tool Changer Capacity: 30 Stations Tool Change Time: 4.2 Sec. Tool to Tool Max Tool Length: 4" / 10" with Open Adjacent Pots Max Tool weight: 30 Lbs. Spindle Drive: 30 HP Vector Spindle Drive Spindle To Table Distance: 5" - 35" Haas 32-Bit CNC Control, 7500 RPM CAT-50 Taper Gearbox Spindle, 30 Station Twin-Arm Automatic Tool Changer, 4th Axis Brush Style Drive and Wiring, Through Spindle Coolant, Tool and Parts Probing System, High Intensity Lightint, 3-1/2" Floppy Drive, Chip Auger, Coolant System with Tank & Pumps.

Recorded options

These option names were recorded; installed, included and operating status is not established.

Chip ConveyorCoolant Thru SpindleProbeProgrammable Coolant
TRANSFER THE SEARCH

Related HAAS VF6-50 records.