INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Source record marked active — verifyVertical Machining Center · MBB-R-66B42ED50C50

2008 HAAS VF6-40TR machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Request source verification →Generate research briefResearch HAAS VF6-40TR
Recorded asking price$59,500Location not published · Availability unconfirmed · observed March 29, 2026
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Open model research →
Year2008
BrandHAAS
ModelVF6-40TR
CategoryVertical Machining Center
ControlNot published
HoursNot published
ConditionUsed
MBB research recordMBB-R-66B42ED50C50
SOURCE RECORD CONTEXT

About this 2008 HAAS VF6-40TR observation.

The catalog retained a used Vertical Machining Center record, no public location and $59,500 as of March 29, 2026. Its source-state label is “Source record marked active — verify.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent HAAS VF6-40TR model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-66B42ED50C50.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-66B42ED50C50 · MBB-owned public code
Last catalog observation
March 29, 2026
Recorded source
Source URL not retained in this public record
Recorded asking price
$59,500 · currency and terms not separately retained
Recorded location
Location not published
Specification scope
Source-recorded exact-unit fields; not independently verified
Source-state label
Source record marked active — verify
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Originating source URL was not retained in this public record.
  • Public machine location was not retained.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2008 HAAS VF6-40TR record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Verify this sourceBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2008 HAAS VF6-40TR record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2008 HAAS VF6-40TR source-recorded specifications.

These fields were retained with the source record and have not been independently verified by MBB.

Y Axis Travel
32 "
X Axis Travel
64 "
Z Axis Travel
30 "
Spindle Motor
30 HP
Spindle Speed
7500 RPM
Spindle Taper
40
Tool Changer
40 ATC
Rapid Rate X Axis
540 IPM
Rapid Rate Y Axis
600 IPM
Rapid Rate Z Axis
600 IPM
Max Table Load
500 LBS
Table Size
12.2
Weight
26100 LBS

Additional record details

X Axis Travel: 64" Y Axis Travel: 32" Z Axis Travel: 30" Rapid Rate X Axis: 540 IPM Rapid Rate Y Axis: 600 IPM Rapid Rate Z Axis: 600 IPM Max Table Load: 500 LBS Spindle Motor: 30 HP Spindle Speed: 8,100 RPM Spindle Taper: 40 Tool Changer: 24 ATC Max Cutting 500ipm Max Tool Diameter 2.5' Max Tool Diameter 5" Max Tool Length 16" Max Tool Weight 12" Tool-to-Tool (avg) 2.8 s Chip-to-Chip (avg) 3.6 s A Axis - Tilt ± 120 ° B Axis - Rotation 360 ° Max Weight on Platter 500 lb Max Part Swing 31" Rapids on A 50 °/sec Rapids on B 50 °/sec Max Cutting A 33 °/sec Max Cutting B 33 °/sec Weight: 26,100 LBS Table Size: 12.2" Diameter X Axis Travel: 64" Y Axis Travel: 32" Z Axis Travel: 30" Max. Table Load: 500 Lbs. Spindle Speed: 7500 RPM Spindle Taper: CAT 40 Tool Changer: 40 Position Side Mount A Axis - Tilt ± 120° B Axis - Rotation 360° Max. Part Swing: 31" EQUIPPED WITH: High Speed Machining 16 Megabytes Expanded Memory Brushless A Axis and Brushless B Axis Lincoln Spindle Motor Rigid Tapping 34 Position Coolant Coordinate Rotation and Scaling Macros Chip Auger Thru Spindle Coolant Second Home Button M19 Orientation P and R Codes Extra Rapid Traverse (10 mm Pitch Ball Screw) Wireless Intuitive Probing System (Originally Installed NOT Currently Complete) The WIPS System has the Tool Touch Sensor and the Optical Receiver but is MISSING THE PROBE Power Failure Module MAG Encoder Motor 2 Speed Geared Drive 20 HP Main Motor, Wired for 3 Phase, 60 Cycle, 220 Volts Overall Size: 157" x 128" x 119" x 26,100 Lbs.

Recorded options

These option names were recorded; installed, included and operating status is not established.

Coolant Thru Spindle
TRANSFER THE SEARCH

Related HAAS VF6-40TR records.