INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Historical sold recordVertical Machining Center · MBB-R-2C84D320D657

2006 HAAS VF5 machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Open recorded source ↗Generate research briefResearch HAAS VF5
Recorded asking price$39,500Location not published · Historical sold record · observed May 17, 2025
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Verify at source →
Year2006
BrandHAAS
ModelVF5
CategoryVertical Machining Center
ControlNot published
HoursNot published
ConditionUsed
MBB research recordMBB-R-2C84D320D657
SOURCE RECORD CONTEXT

About this 2006 HAAS VF5 observation.

The catalog retained a used Vertical Machining Center record, no public location and $39,500 as of May 17, 2025. Its source-state label is “Historical sold record.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent HAAS VF5 model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-2C84D320D657.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-2C84D320D657 · MBB-owned public code
Last catalog observation
May 17, 2025
Recorded source
abltechnology.com
Recorded asking price
$39,500 · currency and terms not separately retained
Recorded location
Location not published
Specification scope
Model-reference baseline; exact-unit values unknown
Source-state label
Historical sold record
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Public machine location was not retained.
  • Exact-unit specifications are unknown; displayed specifications are model-reference baselines.
  • Installed and included options are unknown.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2006 HAAS VF5 record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Find a current comparableBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2006 HAAS VF5 record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2006 HAAS VF5 model-reference specifications.

These are model-level reference facts, not proof of this exact unit. Verify the year, control, options and installed configuration.

Y Axis Travel
26.0 "
X Axis Travel
50.0 "
Z Axis Travel
25.0 "
Spindle Motor
30.0 HP
Spindle Speed
8100.0 RPM
Spindle Taper
40.0
Tool Changer
30.0 ATC
Rapid Rate X Axis
710.0 IPM
Rapid Rate Y Axis
710.0 IPM
Rapid Rate Z Axis
710.0 IPM
Max Table Load
4000.0 LBS
Weight
14920.0 LBS

Additional record details

Condition: Used Stock Number: 118784 Table size: 52" x 23" Table load capacity: 4,000 lbs. X-axis travel: 50" Y-axis travel: 26" Z-axis travel: 25" Spindle nose to table: 7" - 32" Transmission: Direct Drive Spindle motor: 20 HP (brushless) Spindle taper: CAT 40 Spindle speeds: 7,500 RPM Tool magazine capacity: 40 Position ATC Side Mount Cutting feedrates: 500 IPM Rapid traverse rates: 710 IPM Machine dimensions lxwxh: 148"x102"x118" Machine weight: 14,600 lbs. /n 4th Axis Drive & Wiring40 Station Side Mounted Tool ChangerProgrammable Coolant NozzleThrough the Spindle CoolantAuger Style Chip Conveyor Remote Jog HandleRigid TappingCoordinate Rotation & ScalingSpindle Orientation1 MB Programming MemoryVisual Quick Code ProgrammingUser Definable Macros3.5" Floppy Disk Drive Interface converted to a USB Port InterfaceRS 232 Port InterfaceWired 208/230 Volt ElectricsRECENT WORK DONERecently Replaced Spindle MotorNew X Axis Linear Guide RailsNew X Axis Ballnut and Thrust BearingsNew Y Axis Thrust BearingsNew Z Axis Ball Screw & Thrust BearingsNew Lube LinesReplaced All Window Glass in Front and Both Sides**Manufactured New in March of 2006****Machine Motion Hours 11,546*****Machine Spindle Hours 12,616****Haas HRT-310 4th Axis Rotary Table seen in photos availalble at additional cost**

TRANSFER THE SEARCH

Related HAAS VF5 records.

Source record marked active — verify
Vertical Machining Center · MBB-R-4060E18FBA97

2007 HAAS VF5

Recorded asking price
Price not published
Recorded location
Not published
Open research record →