Source record marked active — verifyVertical Machining Center · MBB-R-E4A80C0083F0

1999 HAAS VF4 machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Request source verification →Generate research brief Research HAAS VF4

Recorded asking price$15,500Location not published · Availability unconfirmed · observed February 16, 2026

MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Open model research →

Year1999

BrandHAAS

ModelVF4

CategoryVertical Machining Center

ControlNot published

HoursNot published

ConditionUsed

MBB research recordMBB-R-E4A80C0083F0

SOURCE RECORD CONTEXT

About this 1999 HAAS VF4 observation.

The catalog retained a used Vertical Machining Center record, no public location and $15,500 as of February 16, 2026. Its source-state label is “Source record marked active — verify.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent HAAS VF4 model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-E4A80C0083F0.

Open the Used Machine Decision Kit →Plan production-ready cost →

Record identity: MBB-R-E4A80C0083F0 · MBB-owned public code
Last catalog observation: February 16, 2026
Recorded source: Source URL not retained in this public record
Recorded asking price: $15,500 · currency and terms not separately retained
Recorded location: Location not published
Specification scope: Source-recorded exact-unit fields; not independently verified
Source-state label: Source record marked active — verify
Present availability: Not independently confirmed by MBB
MBB role: Independent research record; not the seller or broker

Unresolved before reliance

Originating source URL was not retained in this public record.
Public machine location was not retained.
Installed and included options are unknown.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 1999 HAAS VF4 record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Verify this sourceBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →

BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 1999 HAAS VF4 record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →

MACHINE DETAILS

1999 HAAS VF4 source-recorded specifications.

These fields were retained with the source record and have not been independently verified by MBB.

Y Axis Travel: 20 "
X Axis Travel: 50 "
Z Axis Travel: 25 "
Spindle Motor: 20 HP
Spindle Speed: 7500 RPM
Spindle Taper: 40
Tool Changer: 20 ATC
Rapid Rate X Axis: 710 IPM
Rapid Rate Y Axis: 710 IPM
Rapid Rate Z Axis: 710 IPM
Max Table Load: 3500 LBS
Weight: 11720 LBS

Additional record details

X Axis Travel: 50" Y Axis Travel: 20" Z Axis Travel: 25" Rapid Rate X Axis: 710 IPM Rapid Rate Y Axis: 710 IPM Rapid Rate Z Axis: 710 IPM Max Table Load: 3,500 LBS Spindle Motor: 20 HP Spindle Speed: 7,500 RPM Spindle Taper: 40 Tool Changer: 20 ATC Max Thrust X: 2550 lbf Max Thrust Y: 2550 lbf Max Thrust Z: 4200 lbf Max Cutting: 650 ipm Max Torque: 90 ft-lbf Spindle Nose: 4.2" - 29.2" Drive System: Inline Direct-Drive Tool-to-Tool: 4.2 sec change Coolant Capacity: 55 gal Table Size: 52" x 18" Weight: 11,720 LBS Haas VF-4 CNC Vertical Machining Center Mill 52" x 18" Table (3,500 lbs Capacity) 50" x 20" x 25" Travels 20 HP 2-Speed Gear-Box Spindle (the High-Torque Gear-Drive) 10,000 RPM Spindle 24 + 1 Side-Mount Swing-Arm Tool Changer Cat 40 Tool Taper 14,300 lbs Weight Mfg. Date: 1999 Equipped With: 10K, 2-Speed High-Torque Gear-Box Spindle Option 4th Axis Servo Drive & Interface (no rotary table included) Programmable Coolant Nozzle at spindle Rigid Tapping Remote Jog Handwheel Chip Auger Side-Mounted Swing-Arm ATC Option *Only 5,000 Hours on Spindle and Motion Time! (see photo) **Runs great & sounds great, under power here in my shop. No issues. A one-owner machine.

TRANSFER THE SEARCH