INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Historical sold recordVertical Machining Center · MBB-R-A7C75A3634F2

2020 HAAS UMC500SS machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Request source verification →Generate research briefResearch HAAS UMC500SS
Recorded asking price$149,900Location not published · Historical sold record · observed December 3, 2022
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Open model research →
Year2020
BrandHAAS
ModelUMC500SS
CategoryVertical Machining Center
ControlNot published
HoursNot published
ConditionUsed
MBB research recordMBB-R-A7C75A3634F2
SOURCE RECORD CONTEXT

About this 2020 HAAS UMC500SS observation.

The catalog retained a used Vertical Machining Center record, no public location and $149,900 as of December 3, 2022. Its source-state label is “Historical sold record.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent HAAS UMC500SS model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-A7C75A3634F2.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-A7C75A3634F2 · MBB-owned public code
Last catalog observation
December 3, 2022
Recorded source
Source URL not retained in this public record
Recorded asking price
$149,900 · currency and terms not separately retained
Recorded location
Location not published
Specification scope
Source-recorded exact-unit fields; not independently verified
Source-state label
Historical sold record
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Originating source URL was not retained in this public record.
  • Public machine location was not retained.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2020 HAAS UMC500SS record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Find a current comparableBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2020 HAAS UMC500SS record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2020 HAAS UMC500SS source-recorded specifications.

These fields were retained with the source record and have not been independently verified by MBB.

Y Axis Travel
16 "
X Axis Travel
24 "
Z Axis Travel
16 "
Spindle Motor
30 HP
Spindle Speed
15000 RPM
Spindle Taper
40
Tool Changer
501 ATC
Rapid Rate X Axis
900 IPM
Rapid Rate Y Axis
900 IPM
Rapid Rate Z Axis
900 IPM
Max Table Load
500 LBS
Table Size
15.7
Weight
11900 LBS

Additional record details

X Axis Travel: 24" Y Axis Travel: 16" Z Axis Travel: 16" Rapid Rate X Axis: 900 IPM Rapid Rate Y Axis: 900 IPM Rapid Rate Z Axis: 900 IPM Table Size: 15.7 Max Table Load: 500 LBS Spindle Motor: 30 HP Spindle Speed: 15,000 RPM Spindle Taper: 40 CT Tool Changer: 50 + 1 ATC Spindle Nose to Platter 4"-20" Tool to Tool: 1.8 seconds Chip to Chip: 2.4 seconds B AXIS: Travel: 120 ° to 35- ° Max Speed: 50 °/sec Max Torque: 1854 ft-lbf Brake Torque: 900 ft-lbf PLATTER Platter Diameter 15.7" Max Weight 500 lbs T-Slot Width 0.626" - 0.630" T-Slot Center Distance: 2.48" Number of T-Slots: 5 AXIS MOTORS: Max Thrust X 3300 lbf Max Thrust Y 3300 lbf Max Thrust Z 4050 lbf TOOL CHANGER Max Tool Diameter (full) 2.5" Max Tool Diameter (adjacent empty) 5.0" Max Tool Length (from gage line) 12" Max Tool Weight 12 lb Tool-to-Tool (avg) 2.8 s s Chip-to-Chip (avg) 3.6 s Dimensions: 119" x 92" x 101" Weight: 11,900 LBS

Recorded options

These option names were recorded; installed, included and operating status is not established.

5 AxisChip ConveyorCoolant Thru SpindleProbeProgrammable Coolant
TRANSFER THE SEARCH

Related HAAS UMC500SS records.