INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Historical listing recordVertical Machining Center · MBB-R-66A51596AD2E

2019 HAAS UMC1000 machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Open recorded source ↗Generate research briefResearch HAAS UMC1000
Recorded asking pricePrice not publishedLocation not published · Historical record · observed January 9, 2026
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Verify at source →
Year2019
BrandHAAS
ModelUMC1000
CategoryVertical Machining Center
ControlNot published
HoursNot published
ConditionUsed
MBB research recordMBB-R-66A51596AD2E
SOURCE RECORD CONTEXT

About this 2019 HAAS UMC1000 observation.

The catalog retained a used Vertical Machining Center record, no public location and Price not published as of January 9, 2026. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent HAAS UMC1000 model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-66A51596AD2E.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-66A51596AD2E · MBB-owned public code
Last catalog observation
January 9, 2026
Recorded source
abltechnology.com
Recorded asking price
Price not published
Recorded location
Location not published
Specification scope
Model-reference baseline; exact-unit values unknown
Source-state label
Historical listing record
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Asking price, currency and commercial terms are not published.
  • Public machine location was not retained.
  • Exact-unit specifications are unknown; displayed specifications are model-reference baselines.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2019 HAAS UMC1000 record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Find a current comparableBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2019 HAAS UMC1000 record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2019 HAAS UMC1000 model-reference specifications.

These are model-level reference facts, not proof of this exact unit. Verify the year, control, options and installed configuration.

Y Axis Travel
25.0 "
X Axis Travel
40.0 "
Z Axis Travel
25.0 "
Spindle Motor
30.0 HP
Spindle Speed
8100.0 RPM
Spindle Taper
40.0
Tool Changer
30.0 ATC
Rapid Rate X Axis
900.0 IPM
Rapid Rate Y Axis
900.0 IPM
Rapid Rate Z Axis
900.0 IPM
Max Table Load
1000.0 LBS

Additional record details

Condition: Used Stock Number: 119800 Table size: 24.8" Diameter Table load capacity: 1,000 lbs X axis travel: 40" Y axis travel: 25" Z axis travel: 25" B axis rotate of trunnion: -35 Degrees to 120 Degrees C axis table rotation: .001 Degree Positioning Spindle taper: HSK-A63 Spindle speed: 15,000 RPM Spindle motor: 30 HP Distance Spindle Nose to Table Top: 4" - 29" Tool magazine: 50 + 1 Position Toolchanger Maximum Tool Diameter / Length / Weight: 5" / 12" / 12 lbs. Rapid traverse rates: 900 IPM Maximum feed rates: 650 IPM Machine dimensions: 168" x 94" x 116" Machine weight: 19,100 lbs Trunnion Style 5th Axis Table WIPS Renishaw Tool & Part Probe WiFi VPS Editing Media Display 1GB Memory Compensation Tables Coolant Through the Spindle Rotary Axis Calibration Tool 15,000 RPM Spindle Option Spindle Orientation Coordinate Rotation & Scaling User Definable Macros Chip Conveyor Programmable Coolant Nozzle 50 Station Tool Changer Rigid Tapping Remote Jog Handle High-Speed Machining Tool Air Blast Coolant System with Tank & Pump & 95 Gallon Coolant Tank Early Power Failure Detection Module Ethernet Interface USB Port Interface RS 232 Port Interface 15" Color LCD Monitor w/ Touch Screen Control ** Price New as Equipped at $264,475 **

Recorded options

These option names were recorded; installed, included and operating status is not established.

Chip ConveyorProbeProgrammable Coolant
TRANSFER THE SEARCH

Related HAAS UMC1000 records.