INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Historical listing recordVertical Machining Center · MBB-R-7B929740D3CE

2019 HAAS TM2P machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Request source verification →Generate research briefResearch HAAS TM2P
Recorded asking pricePrice not publishedLocation not published · Historical record · observed May 14, 2024
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Open model research →
Year2019
BrandHAAS
ModelTM2P
CategoryVertical Machining Center
ControlNot published
HoursNot published
ConditionUsed
MBB research recordMBB-R-7B929740D3CE
SOURCE RECORD CONTEXT

About this 2019 HAAS TM2P observation.

The catalog retained a used Vertical Machining Center record, no public location and Price not published as of May 14, 2024. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent HAAS TM2P model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-7B929740D3CE.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-7B929740D3CE · MBB-owned public code
Last catalog observation
May 14, 2024
Recorded source
Source URL not retained in this public record
Recorded asking price
Price not published
Recorded location
Location not published
Specification scope
Model-reference baseline; exact-unit values unknown
Source-state label
Historical listing record
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Originating source URL was not retained in this public record.
  • Asking price, currency and commercial terms are not published.
  • Public machine location was not retained.
  • Exact-unit specifications are unknown; displayed specifications are model-reference baselines.
  • Installed and included options are unknown.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2019 HAAS TM2P record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Find a current comparableBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2019 HAAS TM2P record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2019 HAAS TM2P model-reference specifications.

These are model-level reference facts, not proof of this exact unit. Verify the year, control, options and installed configuration.

Y Axis Travel
16.0 "
X Axis Travel
40.0 "
Z Axis Travel
16.0 "
Spindle Motor
7.5 HP
Spindle Speed
6000.0 RPM
Spindle Taper
40.0
Tool Changer
10.0 ATC
Rapid Rate X Axis
400.0 IPM
Rapid Rate Y Axis
400.0 IPM
Rapid Rate Z Axis
400.0 IPM
Max Table Load
1000.0 LBS

Additional record details

I purchased this Haas TM2P 3-axis CNC milling machine as a big boy toy for my home shop back in 2020. I have used the machine to make prototypes of some of the ideas I had. I will not have time to use the machine anymore since I accepted a new executive job in another state, and I decided to sell it instead of taking it with me. This unit was manufactured in October 2019 and installed in 2020. It's a single phase 220 V machine that can be installed in a factory or a home shop. I picked the TM2P because it has a big table and large travels (40" in X direction, 16" in Y direction. and 16" in Z direction), so you can cut bigger pieces with it. The spindle is 7.5 horsepower with a maximum spindle speed of 6000 RPM which is more than enough for cutting most of the metals. It has a CAT 40 spindle taper and a 10 -pocket automatic tool changer. I added Rigid tapping when I ordered it. You can use a CAM software to program the machine or use the very useful conversational programming. It comes with USB port, WIFI and liquid cooling system. The machine is located in Bowling Green, KY. I can't ship the unit, but you can pick it up at my place. I will move the machine out of my home shop and will provide you with the original wooden platform that came with the machine. This machine looks and works like a brand-new machine since I didn't use it much. I kept up with the regular cleaning and greasing and never needed any repair or services. All original parts and paint. Please feel free to come and test the machine or ask any questions.

TRANSFER THE SEARCH

Related HAAS TM2P records.