INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Historical sold recordCNC Lathe · MBB-R-8B0692E70E10

2020 HAAS ST45L machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Open recorded source ↗Generate research briefResearch HAAS ST45L
Recorded asking pricePrice not publishedLocation not published · Historical sold record · observed September 2, 2026
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Verify at source →
Year2020
BrandHAAS
ModelST45L
CategoryCNC Lathe
ControlNot published
HoursNot published
ConditionUsed
MBB research recordMBB-R-8B0692E70E10
SOURCE RECORD CONTEXT

About this 2020 HAAS ST45L observation.

The catalog retained a used CNC Lathe record, no public location and Price not published as of September 2, 2026. Its source-state label is “Historical sold record.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent HAAS ST45L model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-8B0692E70E10.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-8B0692E70E10 · MBB-owned public code
Last catalog observation
September 2, 2026
Recorded source
clarkmachinerysales.com
Recorded asking price
Price not published
Recorded location
Location not published
Specification scope
Model-reference baseline; exact-unit values unknown
Source-state label
Historical sold record
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Asking price, currency and commercial terms are not published.
  • Public machine location was not retained.
  • Exact-unit specifications are unknown; displayed specifications are model-reference baselines.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2020 HAAS ST45L record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Find a current comparableBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2020 HAAS ST45L record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2020 HAAS ST45L model-reference specifications.

These are model-level reference facts, not proof of this exact unit. Verify the year, control, options and installed configuration.

Bar Capacity
6.5 "
Chuck Size
18.0 "
Spindle Speed
1400.0 RPM
Spindle Motor
40.0 HP
X Axis Travel
17.0 "
Z Axis Travel
80.0 "
Rapid Rate X Axis
710.0 IPM
Rapid Rate Z Axis
710.0 IPM
Turret Tools
12.0 Station
Max Turning Dia
25.5 "
Max Turning Length
80.0 "
Max Swing
34.5 "

Additional record details

SWING OVER BED: 876.3 mm MAX CUTTING DIAMETER: 647.7 mm MAX CUTTING LENGTH: 2,032 mm X-AXIS TRAVEL: 431.8 mm Z-AXIS TRAVEL: 2,032 mm CHUCK SIZE: 457.2 mm BAR CAPACITY: 165.1 mm SPINDLE BORE: 177.8 mm SPINDLE NOSE: A2-11 SPINDLE MOTOR: 41 kW SPINDLE SPEED: 1,400 RPM TURRET CAPACITY: 12 TURRET TYPE: HYBRID BOT/VDI LIVE MILLING: Yes LIVE MILLING SPEED: 60,000 RPM HAAS NEXTGEN CONTROL BIG BORE (6.5" BAR CAPACITY) LONG BED (80" CUTTING LENGTH) LIVE MILLING (6,000 RPM UPGRADE) EXTRA-PERFORMANCE OPTION (55 HP) 18", 3-JAW LMC HYDRAULIC CHUCK (NOT INSTALLED) 16", 4-JAW MANUAL CHUCK (CURRENTLY INSTALLED RIP-116 MANUAL STEADY REST (1" 16") STEADY REST PROVISION EXTENDED TOOL POCKET PROGRAMMABLE TAILSTOCK TOOL PRESETTER CHIP CONVEYOR HIGH-PRESSURE COOLANT (1,000 PSI) AUXILIARY COOLANT FILTRATION SYSTEM REMOTE JOG HANDLE (TOUCH SCREEN) HIGH-INTENSITY LIGHTING CHIP TRAY FILTER KIT VISUAL PART PROGRAMMING SYSTEM (VPS EDITING) MEDIA DISPLAY M-CODE (M130) SPINDLE ORIENTATION RIGID TAPPING MACROS ETHERNET USB PORT 1GB MEMORY HAASCONNECT: REMOTE MONITORING HAASDROP WIFI CONNECTIVITY (1) RADIAL LIVE TOOL HOLDER (1) AXIAL LIVE TOOL HOLDER AN ASSORTMENT OF STATIC HOLDERS** AS OF JULY 2026, CUTTING TIME 347 HOURS** MACHINE CUT PRIMARILY STEEL ** FULL REPLACEMENT COST, AS EQUIPPED - $450,000 ** IN PLANT, UNDER POWER, AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE** MACHINE CURRENTLY HAS A MANUAL CHUCK INSTALLED, BUT AN 18", 3-JAW HYDRAULIC CHUCK & HYDRAULIC ACTUATOR WILL COME WITH THE MACHINE, AS WELL

Recorded options

These option names were recorded; installed, included and operating status is not established.

Chip ConveyorLive ToolingTailstockTool Presetter
TRANSFER THE SEARCH

Related HAAS ST45L records.