INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Historical sold recordVertical Machining Center · MBB-R-9DDBF461330D

2020 HAAS MINI MILL 2 machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Request source verification →Generate research briefResearch HAAS MINI MILL 2
Recorded asking price$29,500CA · Historical sold record · observed September 7, 2024
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Open model research →
Year2020
BrandHAAS
ModelMINI MILL 2
CategoryVertical Machining Center
ControlHaas Next Generation Control
Hours0-500
ConditionUsed
MBB research recordMBB-R-9DDBF461330D
SOURCE RECORD CONTEXT

About this 2020 HAAS MINI MILL 2 observation.

The catalog retained a used Vertical Machining Center record, CA and $29,500 as of September 7, 2024. Its source-state label is “Historical sold record.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent HAAS MINI MILL 2 model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-9DDBF461330D.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-9DDBF461330D · MBB-owned public code
Last catalog observation
September 7, 2024
Recorded source
Source URL not retained in this public record
Recorded asking price
$29,500 · currency and terms not separately retained
Recorded location
CA
Specification scope
Source-recorded exact-unit fields; not independently verified
Source-state label
Historical sold record
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Originating source URL was not retained in this public record.
  • Installed and included options are unknown.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2020 HAAS MINI MILL 2 record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Find a current comparableBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2020 HAAS MINI MILL 2 record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2020 HAAS MINI MILL 2 source-recorded specifications.

These fields were retained with the source record and have not been independently verified by MBB.

Spindle Motor
7.5 HP
Spindle Speed
6000 RPM
Spindle Taper
40
Tool Changer
20 ATC
Max Table Load
500 LBS
Weight
5100 LBS

Additional record details

I used this mill for product development and small-batch production for my company but I no longer need it, VERY LOW feed hours at 188. I ran it quite conservatively as it was mostly for prototyping and small-batch and only cut aluminum. It is located in Brentwood, Los Angeles, a few minutes off the 405. We trucked & forklifted it in here no problem, so it’ll be no problem getting it out. INFO/HISTORY Feed Hours: 188! Serial Number: 1176328 Date of Mfg: 10/2020 Material Cut: aluminum 6061 SPECS Power: 1 phase Axis Travel X/Y/Z: 20"x16"x14" Rapid Rate X/Y/Z: 600 IPM Table Size: 40"x14" Max Table Load: 500 LBS Spindle Motor: 7.5 HP Spindle Speed: 6,000 RPM Spindle Taper: 40 Tool Changer: 20 ATC Dimensions (HxWxD): 90"x72"x70" Weight: 5,100 LBS INCLUDED ADD-ONS (MSRP) Visual Part Programming System ($2,195) High-Flow Coolant Pump ($895) High-Speed Machining/HSM ($3,095) Rigid Tapping ($1,695) Convenience Package ($795) 2023 Haas 6" Vise + jaws ($650 MSRP) OPTIONS (MSRP) - 17x CT40 tool holders (MSRP $63-69) @ $20/piece - ER16 (4x 2.5”, 3x 4”), ER25 (3x 2.5”, 2x 4”), ER32 (3x 2.5”, 2x 4”) - Haas HNPAL aluminum face mill (MSRP $230) – $140 ( - 2” HPNP Shell Mill (MSRP $192) w/ 14 extra inserts (MSRP $154) – $110 + $55 = $165 - California Air Tools 20020 Ultra Quiet & Oil-Free Air Compressor 2.0 hp, 20 gal Steel Tank (2020) (MSRP $525) – $200 (

TRANSFER THE SEARCH

Related HAAS MINI MILL 2 records.