Source record marked active — verify
Vertical Machining Center · MBB-R-BD31A8C8C58F2016 HAAS DT2
- Recorded asking price
- Price not published
- Recorded location
- Not published
Source record marked active — verifyVertical Machining Center · MBB-R-63D230D2A5B2
2023 HAAS DT2 machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
Recorded asking price$77,000Location not published · Availability unconfirmed · observed November 19, 2025
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Verify at source →
Year2023
BrandHAAS
ModelDT2
CategoryVertical Machining Center
ControlHaas Next Gen CNC Control
HoursNot published
ConditionUsed
MBB research recordMBB-R-63D230D2A5B2
SOURCE RECORD CONTEXT
About this 2023 HAAS DT2 observation.
The catalog retained a used Vertical Machining Center record, no public location and $77,000 as of November 19, 2025. Its source-state label is “Source record marked active — verify.” None of those fields independently proves present availability.
TRANSFER THE RESEARCH
Compare the machine, not only the ad.
Use the persistent HAAS DT2 model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
MBB EVIDENCE CARD
Evidence boundary for MBB-R-63D230D2A5B2.
- Record identity
- MBB-R-63D230D2A5B2 · MBB-owned public code
- Last catalog observation
- November 19, 2025
- Recorded source
- ebay.com
- Recorded asking price
- $77,000 · currency and terms not separately retained
- Recorded location
- Location not published
- Specification scope
- Source-recorded exact-unit fields; not independently verified
- Source-state label
- Source record marked active — verify
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
Unresolved before reliance
- Public machine location was not retained.
- Installed and included options are unknown.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
FROM RECORD TO DECISION
Use this 2023 HAAS DT2 record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
BEYOND THE LISTING
Know what happens after the machine is found.
Transfer this 2023 HAAS DT2 record into the provider and preparation paths required to move, place, support and fund the equipment.
RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS
2023 HAAS DT2 source-recorded specifications.
These fields were retained with the source record and have not been independently verified by MBB.
- Y Axis Travel
- 16 "
- X Axis Travel
- 28 "
- Z Axis Travel
- 15.5 "
- Spindle Motor
- 15 HP
- Spindle Speed
- 15000 RPM
- Spindle Taper
- 30
- Tool Changer
- 20 ATC
- Rapid Rate X Axis
- 2400 IPM
- Rapid Rate Y Axis
- 2400 IPM
- Rapid Rate Z Axis
- 2400 IPM
- Max Table Load
- 250 LBS
Additional record details
X Axis Travel: 28" Y Axis Travel: 16" Z Axis Travel: 15.5" Rapid Rate X Axis: 2,400 IPM Rapid Rate Y Axis: 2,400 IPM Rapid Rate Z Axis: 2,400 IPM Max Table Load: 250 LBS Spindle Motor: 15 HP Spindle Speed: 15,000 RPM Spindle Taper: 30 Tool Changer: 20 ATC Drive System Inline Direct-Drive Max Torque 16 ft-lb @ 2800 rpm Max Tapping Speed 5000 rpm Max Tap Size (aluminum) 1/2"–13 Max Cutting 1200 ipm Chip to Chip 1.8 sec Table Size: 34" x 15" Dimensions: 107" x 82" x 98"
TRANSFER THE SEARCH
Related HAAS DT2 records.
Source record marked active — verify
Vertical Machining Center · MBB-R-9D024290C8DC2016 HAAS DT2
- Recorded asking price
- Price not published
- Recorded location
- Not published
Historical listing record
Vertical Machining Center · MBB-R-D74013843EFC2016 HAAS DT2
- Recorded asking price
- Price not published
- Recorded location
- Not published
Historical listing record
Vertical Machining Center · MBB-R-709CD981B1842019 HAAS DT2
- Recorded asking price
- $68,500
- Recorded location
- Not published
Historical listing record
Vertical Machining Center · MBB-R-F7053BFA27012020 HAAS DT2
- Recorded asking price
- Price not published
- Recorded location
- Not published
Historical listing record
Vertical Machining Center · MBB-R-128D1D201A5F2022 HAAS DT2
- Recorded asking price
- $72,500
- Recorded location
- Not published
Historical listing record
Vertical Machining Center · MBB-R-799F59E714922020 HAAS DT2
- Recorded asking price
- $59,900
- Recorded location
- Not published
Historical listing record
Vertical Machining Center · MBB-R-1C1C13888EB42018 HAAS DT2
- Recorded asking price
- $71,500
- Recorded location
- Not published