INDEPENDENT MACHINE RESEARCH.Machine Blue Book home ↗
Skip to main content
Independent machine intelligence · Research before the decision
THE MACHINEBLUE BOOKResearch · Market · Ownership
Source record marked active — verifyHorizontal Machining Center · MBB-R-D9F6F00246F4

2022 ENSHU GE480H machine research record.

This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.

Request source verification →Generate research briefResearch ENSHU GE480H
Recorded asking price$216,000Location not published · Availability unconfirmed · observed July 23, 2026
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Open model research →
Year2022
BrandENSHU
ModelGE480H
CategoryHorizontal Machining Center
ControlNot published
HoursNot published
ConditionUsed
MBB research recordMBB-R-D9F6F00246F4
SOURCE RECORD CONTEXT

About this 2022 ENSHU GE480H observation.

The catalog retained a used Horizontal Machining Center record, no public location and $216,000 as of July 23, 2026. Its source-state label is “Source record marked active — verify.” None of those fields independently proves present availability.

TRANSFER THE RESEARCH

Compare the machine, not only the ad.

Use the persistent ENSHU GE480H model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.

MBB EVIDENCE CARD

Evidence boundary for MBB-R-D9F6F00246F4.

Open the Used Machine Decision Kit →Plan production-ready cost →
Record identity
MBB-R-D9F6F00246F4 · MBB-owned public code
Last catalog observation
July 23, 2026
Recorded source
Source URL not retained in this public record
Recorded asking price
$216,000 · currency and terms not separately retained
Recorded location
Location not published
Specification scope
Source-recorded exact-unit fields; not independently verified
Source-state label
Source record marked active — verify
Present availability
Not independently confirmed by MBB
MBB role
Independent research record; not the seller or broker
Unresolved before reliance
  • Originating source URL was not retained in this public record.
  • Public machine location was not retained.

A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.

FROM RECORD TO DECISION

Use this 2022 ENSHU GE480H record as the starting point.

Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.

Verify this sourceBuyer request →Watch comparable machinesDefine the signal →Plan complete costOpen the worksheet →Understand market valueRequest brief scope →Sell a similar machineStart seller intake →Find the provider pathResearch support →
BEYOND THE LISTING

Know what happens after the machine is found.

Transfer this 2022 ENSHU GE480H record into the provider and preparation paths required to move, place, support and fund the equipment.

RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS

2022 ENSHU GE480H source-recorded specifications.

These fields were retained with the source record and have not been independently verified by MBB.

X Axis Travel
31.5 "
Y Axis Travel
31.5 "
Z Axis Travel
31.5 "
Spindle Speed
15000 RPM
Spindle Taper
40 CT
Spindle Motor
50 HP
Tool Changer
60 ATC
Weight
27000 LBS

Additional record details

X Axis Travel: 31.5" Y Axis Travel: 31.5" Z Axis Travel: 31.5" Spindle Speed: 15,000 RPM Spindle Taper: CAT40 CT Spindle Motor: 50 HP Tool Changer: 60 ATC Fanuc 31iMB control Included Fanuc 50HP spindle drive Included BIGPlus/CAT 40 spindle taper, interchangeably Included Two (2) 500mm Pallets with 24 M16 tapped holes Included Rotary automatic pallet changer Included 60-tool automatic tool changer Included 15,000 RPM integral spindle Included Full fourth [B] axis Included Mosnic high volume rolling filter chip conveyor with magnetic separator Included Spindle air curtain Included Spindle oil chiller Included Through spindle coolant 256 PSI at 15 GPM [seals to 1,000PSI for future upgrade] Included Spindle flood coolant Included Bed flush coolant Included Ceiling shower coolant Included Refrigerated & temperature controlled spindle, ballscrews and servo motor mounts Included Spindle/rapid/feedrate override Included LED work light Included Three stage stack light Included Total enclosed splashguard with manual operated doors Included CE Spec Included Inch/metric switchable capability Included Helical interpolation Included Coordinate Rotation Included 2MB total program memory Included Automatic corner override Included Tool offset memory type C Included 200 tool offsets Included Custom macro B Included Dimensions: 194" x 111" x null" Weight: 27,000 LBS Advancing the technology of ultra-high performance for stand-alone production, lean lines or agile machining systems. • 90M/min (3,543 IPM) rapid traverse rates on X/Y/Z • 1.0 G (9.8 M/sec²) axis acceleration/deceleration on X/Y/Z • Dual range 50 HP gearless AC spindle features ceramic bearings • Refrigerated & temperature controlled spindle and ballscrews • Spindle ramps to 15,000 RPM in just 1.9 seconds • High torque 250 Nm spindle as standard • Accuracy 0.000080”, full travels on X/Y/Z, repeatability ± 0.000040” • Automatic Tool Changer with 1.2 second tool-tool, 3.2 second chip-chip • Rotary Automatic Pallet Changer exchanges 1,100 lbs./pallet in 7 seconds • Large work area, compact footprint - ideal for FMS Pallet Systems • Design for reliability - 5,000 hour mean time between failure (MTBF5000H) 40 TAPER PALLET 500 GE480H MACHINE SPECIFICATIONS Enshu (USA) Corporation 404 E. State Parkway Schaumburg, IL 60173 Tel: ( Fax: ( ver. 042017 JAPAN AXIS TRAVEL STANDARD EQUIPMENT X Axis 31.5" • Fanuc 31iMB control Y Axis 31.5" • Fanuc 50 HP spindle drive Z Axis 31.5" • Fanuc axis servo drives Table top to spindle centerline 2.75"~34.25" • BIG Plus/CAT40 spindle taper, interchangeably Table centerline to spindle face 5.9" ~ 37.4" • 500 mm pallets (19.7" x 19.7") • Rotary automatic pallet changer FEEDRATES • 60-tool automatic tool changer Rapid traverse (X/Y/Z) 3,543 IPM • 15,000 RPM integral spindle Cutting feedrate 0 ~ 3,543 IPM • Ceramic spindle bearings Acceleration/Deceleration (X/Y/Z) 1.0g (9.8 M/sec²) • Full 4th axis (360,000 positions) Feed motors, AC Servo 7.4 HP (X/Y/Z) • High volume rolling fil…

Recorded options

These option names were recorded; installed, included and operating status is not established.

360,000 Full 4thCoolant Thru SpindlePallet Pool/FMSProbeProgrammable Coolant
TRANSFER THE SEARCH

Related ENSHU GE480H records.