2005 DYNAPATH M6L machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
About this 2005 DYNAPATH M6L observation.
The catalog retained a used Vertical Machining Center record, no public location and Price not published as of July 19, 2025. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.
Compare the machine, not only the ad.
Use the persistent DYNAPATH M6L model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
Evidence boundary for MBB-R-5236D4613A30.
- Record identity
- MBB-R-5236D4613A30 · MBB-owned public code
- Last catalog observation
- July 19, 2025
- Recorded source
- Source URL not retained in this public record
- Recorded asking price
- Price not published
- Recorded location
- Location not published
- Specification scope
- Source-recorded exact-unit fields; not independently verified
- Source-state label
- Historical listing record
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
- Originating source URL was not retained in this public record.
- Asking price, currency and commercial terms are not published.
- Public machine location was not retained.
- Installed and included options are unknown.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
Use this 2005 DYNAPATH M6L record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
Know what happens after the machine is found.
Transfer this 2005 DYNAPATH M6L record into the provider and preparation paths required to move, place, support and fund the equipment.
2005 DYNAPATH M6L source-recorded specifications.
These fields were retained with the source record and have not been independently verified by MBB.
- Y Axis Travel
- 31.5 "
- X Axis Travel
- 63.5 "
- Z Axis Travel
- 31.5 "
- Spindle Motor
- 25 HP
- Spindle Speed
- 6000 RPM
- Spindle Taper
- 50
- Tool Changer
- 16 ATC
- Rapid Rate X Axis
- 590 IPM
- Rapid Rate Y Axis
- 590 IPM
- Rapid Rate Z Axis
- 472 IPM
- Max Table Load
- 3086 LBS
- Weight
- 27800 LBS
Additional record details
X Axis Travel: 63.5" Y Axis Travel: 31.5" Z Axis Travel: 31.5" Spindle Motor: 25 HP Spindle Speed: 6,000 RPM Spindle Taper: CAT50 Tool Changer: 16 ATC Rapid Rate X Axis: 590 IPM Rapid Rate Y Axis: 590 IPM Rapid Rate Z Axis: 472 IPM Table Size: 72" x 28" Dimensions: 169.3" x 137.4" x 122" Weight: 27,800 LBS Max Table Load: 3,086 LBS Coolant: 2x 55gallon Tanks with Pumps for both tool and wash down Power: 80amps @ 208v 3ph Control: Dynapath Delta 2000M controller with 768k memory Spindle Control: Yaskawa Drivers for Spindle and Servos Maintenance: Replaced LCD screen, added handle wheel, added USB stick file transfer Tooling Included: 100+ CAT-50 Tool Holders, Multiple large face mills, Some larger tooling, Boxes of TG100 collets which most of the collet holders match, shelving and workbench for tool storage. According to the seller, a license of Bobcam V25 and the correct post for the machine can also be supplied on request.