Historical listing record
Vertical Machining Center · MBB-R-757E23A60C492011 DOOSAN VC500
- Recorded asking price
- $29,500
- Recorded location
- KY
Historical listing recordVertical Machining Center · MBB-R-C5C5C13D035C
2008 DOOSAN VC500 machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
Recorded asking price$35,000Location not published · Historical record · observed September 25, 2025
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Open model research →
Year2008
BrandDOOSAN
ModelVC500
CategoryVertical Machining Center
ControlNot published
HoursNot published
ConditionUsed
MBB research recordMBB-R-C5C5C13D035C
SOURCE RECORD CONTEXT
About this 2008 DOOSAN VC500 observation.
The catalog retained a used Vertical Machining Center record, no public location and $35,000 as of September 25, 2025. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.
TRANSFER THE RESEARCH
Compare the machine, not only the ad.
Use the persistent DOOSAN VC500 model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
MBB EVIDENCE CARD
Evidence boundary for MBB-R-C5C5C13D035C.
- Record identity
- MBB-R-C5C5C13D035C · MBB-owned public code
- Last catalog observation
- September 25, 2025
- Recorded source
- Source URL not retained in this public record
- Recorded asking price
- $35,000 · currency and terms not separately retained
- Recorded location
- Location not published
- Specification scope
- No structured specification evidence retained
- Source-state label
- Historical listing record
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
Unresolved before reliance
- Originating source URL was not retained in this public record.
- Public machine location was not retained.
- No structured exact-unit or model-reference specifications were retained.
- Installed and included options are unknown.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
FROM RECORD TO DECISION
Use this 2008 DOOSAN VC500 record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
BEYOND THE LISTING
Know what happens after the machine is found.
Transfer this 2008 DOOSAN VC500 record into the provider and preparation paths required to move, place, support and fund the equipment.
RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS
2008 DOOSAN VC500 model-reference specifications.
No structured specifications were retained for this record. Use the model research page and verify the exact machine configuration.
Additional record details
2008 Doosan VC500 – Vertical Machining Center Specifications General: Machine Type: Vertical Machining Center (VMC) Model: VC500 Year: 2008 Control: Fanuc 18iMA or Fanuc 21iMB Travel & Capacity: X-Axis Travel: 760 mm (29.9 in) Y-Axis Travel: 510 mm (20.0 in) Z-Axis Travel: 570 mm (22.4 in) Table Size: 860 mm × 570 mm (33.8 in × 22.4 in) Max Table Load: 300 kg (660 lbs) Max Workpiece Height: 520 mm (20.5 in) Spindle: Max Spindle Speed: 10,000 RPM Spindle Motor Power: 11/15 kW (15/20 HP) Spindle Taper: ISO 40 (BT-40 compatible) Spindle Nose to Table Distance: 210 mm – 780 mm (8.2 in – 30.7 in) Tooling: Tool Magazine Capacity: 40 tools Tool Shank Type: CAT 40 Max Tool Diameter: 80 mm (3.15 in) with adjacent pockets empty Max Tool Length: 300 mm (11.8 in) Max Tool Weight: 8 kg (17.6 lbs) Tool Change Time: 1.3 sec (tool-to-tool), 4.3 sec (chip-to-chip) Movement & Feed Rates: Rapid Traverse (X/Y): 40,000 mm/min (1,575 IPM) Rapid Traverse (Z): 32,000 mm/min (1,260 IPM) Cutting Feed Rate: 8,000 mm/min (315 IPM) Additional Features: Pallet Changer: 180° dual pallet changer Pallet Change Time: 5 sec Coolant Through Spindle: 20 bar (290 PSI) Chip Conveyor: Included Spindle Oil Cooler: Included Dimensions & Weight: Machine Weight: 9,200 kg (20,278 lbs) Machine Footprint: 3,260 mm × 2,580 mm × 3,130 mm (128.3 in × 101.6 in × 123.2 in)
TRANSFER THE SEARCH