2019 DOOSAN TT1300SYY machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
About this 2019 DOOSAN TT1300SYY observation.
The catalog retained a used CNC Lathe record, no public location and $212,000 as of November 21, 2025. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.
Compare the machine, not only the ad.
Use the persistent DOOSAN TT1300SYY model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
Evidence boundary for MBB-R-DD40C8CB550B.
- Record identity
- MBB-R-DD40C8CB550B · MBB-owned public code
- Last catalog observation
- November 21, 2025
- Recorded source
- facebook.com
- Recorded asking price
- $212,000 · currency and terms not separately retained
- Recorded location
- Location not published
- Specification scope
- No structured specification evidence retained
- Source-state label
- Historical listing record
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
- Public machine location was not retained.
- No structured exact-unit or model-reference specifications were retained.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
Use this 2019 DOOSAN TT1300SYY record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
Know what happens after the machine is found.
Transfer this 2019 DOOSAN TT1300SYY record into the provider and preparation paths required to move, place, support and fund the equipment.
2019 DOOSAN TT1300SYY model-reference specifications.
No structured specifications were retained for this record. Use the model research page and verify the exact machine configuration.
Additional record details
Swing over bed 175 mm (6.89") Swing over carriage 175 mm (6.89") Maximum turning diameter (upper turret) 175 mm (6.89") Maximum turning diameter (lower turret) 175 mm (6.89") Distance between left and right spindle nose 750 mm (29.5") MAIN SPINDLE: Maximum bar capacity 42 MM (1.65”) Recommended chuck size 150 mm (6") Spindle speed 6,000 rpm Spindle nose A2-5 Left spindle draw tube ID 52 mm (2.047") Spindle bore diameter 61 mm (2.4") AC spindle motor (S3 25% rating) 11 kW (10 hp) Maximum spindle torque (S3 25% rating) 116 Nm (86 ft-lb) Max Bar Length (for bar feed application) 915 mm (36”) MAIN SPINDLE C-AXIS: Minimum programmable angle 0.001 degree Rapid traverse rate (RPM) 600 rpm C-axis repeatability±0.006 degree C-axis positioning accuracy0.0167 degree C-axis braking torque132 Nm (97 ft-lb) RIGHT SPINDLE: A axis travel (right spindle) 540 mm (21.26") Spindle speed 6,000 rpm Spindle nose A2-5 Draw tube ID 40 mm (1.57") Spindle bore diameter 53 mm (2.08") AC spindle motor S3 25% rating 11 kW (15 hp) Maximum spindle torque (S3 25% rating) 93 Nm (69 ft-lbs) Standard chuck size 135 mm (5.0") C-AXIS – RIGHT SPINDLE: Minimum programmable angle (degrees)0.001 deg Rapid traverse rate600 rpm C-axis repeatability±0.006 deg C-axis positioning accuracy0.0167 deg Y-AXIS (Upper & Lower Turret): Y-axis travel (total) 80 mm (±40mm) (3.15" (±1.57”)) Y-axis travel (above center) 40 mm (1.57") Y-axis travel (below center) 40 mm (1.57") Y-axis rapid traverse rate 15 m/min (590 ipm) Y-axis repeatability ±0.002 mm (±0.00008") Y-axis feed thrust (continuous) 7,574 N (1,702 lb) Y-axis feed thrust (intermittent) 12,118 N (2,724 lb) BED, SADDLE & CROSS SLIDE: Angle of slant bed 45-degree X1 axis travel 135 mm (5.31") Z1 axis travel 530 mm (20.86") X2 axis travel 135 mm (5.3") Z2 axis travel 530 mm (20.86") X axis rapid traverse rate 30 m/min (1,181 ipm) Z axis rapid traverse rate 40 m/min (1,575 ipm) X axis ball screw diameter 32 mm (1.26") Z axis ball screw diameter 32 mm (1.26") X1 axis feed thrust (continuous) 8,451 N (1,890 lb) X1 axis feed thrust (intermittent) 11,832 N (2,660 lb) Z1 axis feed thrust (continuous) 5,634 N (1,266 lb) Z1 axis feed thrust (intermittent) 7,888 N (1,773 lb) X2 axis feed thrust (continuous) 7,606 N (1,709 lb) X2 axis feed thrust (intermittent) 10,649 N (2,394 lb) Z2 axis feed thrust (continuous) 5,634 N (1,266 lbs) Z2 axis feed thrust (intermittent) 7,888 N (1,773 lb) A axis feed thrust (continuous) 5,634 N (1,266 lb) A axis feed thrust (intermittent) 7,888 N (1,773 lb) X axis repeatability ±0.002 mm (±0.00008") Z axis repeatability ±0.003 mm (±0.00012") TURRETS: Turret Stations 12 + 12 Turret indexing positions 24 + 24 Tool holder type BMT-45 Turning tool shank size (metric turret 20 mm) .75" Boring bar diameter (metric turret 25 mm) 1.0" Turret index time (next station swivel time) 0.1 second Tool selection Bi-directional Turret index repeatability ±0.0005 degree ROTARY TOOLS BOTH TURRETS: Rotating tool RPM 6,000 rpm Rotating tool spin…
Recorded options
These option names were recorded; installed, included and operating status is not established.