Historical listing record
CNC Lathe · MBB-R-FEBECB5B8A9E2007 DOOSAN PUMA 2000SY
- Recorded asking price
- Price not published
- Recorded location
- Not published
Historical listing recordCNC Lathe · MBB-R-0A8D4FF6340D
2008 DOOSAN PUMA 2000SY machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
Recorded asking pricePrice not publishedLocation not published · Historical record · observed July 14, 2026
MBB is not the seller, owner, broker or availability authority.This page records research context. Verify every transaction fact with the originating source before relying on it.Open model research →
Year2008
BrandDOOSAN
ModelPUMA 2000SY
CategoryCNC Lathe
ControlFanuc Series 18i-TB
HoursNot published
ConditionUsed
MBB research recordMBB-R-0A8D4FF6340D
SOURCE RECORD CONTEXT
About this 2008 DOOSAN PUMA 2000SY observation.
The catalog retained a used CNC Lathe record, no public location and Price not published as of July 14, 2026. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.
TRANSFER THE RESEARCH
Compare the machine, not only the ad.
Use the persistent DOOSAN PUMA 2000SY model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
MBB EVIDENCE CARD
Evidence boundary for MBB-R-0A8D4FF6340D.
- Record identity
- MBB-R-0A8D4FF6340D · MBB-owned public code
- Last catalog observation
- July 14, 2026
- Recorded source
- Source URL not retained in this public record
- Recorded asking price
- Price not published
- Recorded location
- Location not published
- Specification scope
- No structured specification evidence retained
- Source-state label
- Historical listing record
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
Unresolved before reliance
- Originating source URL was not retained in this public record.
- Asking price, currency and commercial terms are not published.
- Public machine location was not retained.
- No structured exact-unit or model-reference specifications were retained.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
FROM RECORD TO DECISION
Use this 2008 DOOSAN PUMA 2000SY record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
BEYOND THE LISTING
Know what happens after the machine is found.
Transfer this 2008 DOOSAN PUMA 2000SY record into the provider and preparation paths required to move, place, support and fund the equipment.
RIGGINGMove and place itMachinery movers organized by published footprint.Research riggers →TRANSPORTPlan the haulSpecialized freight and integrated machine transport.Research transport →SITEPrepare the destinationFoundation, access, utilities and commissioning.Use the readiness guide →FINANCINGGo directly to providersIndependent profiles; MBB takes no financial data.Research finance paths →
MACHINE DETAILS
2008 DOOSAN PUMA 2000SY model-reference specifications.
No structured specifications were retained for this record. Use the model research page and verify the exact machine configuration.
Additional record details
Swing over bed: 23.6" Swing over carriage: 21.6" Maximum bar capacity: 2.625” Maximum turning diameter, main: 13.0" Distance between spindle face: main / sub: 33.8” MAIN SPINDLE: Spindle speed: 45 - 5,000 RPM Spindle nose: ASA-A2-6 Draw tube I.D.: 2.67" Spindle bore diameter: 2.99" Spindle motor: 20 HP Maximum spindle torque: 351 ft-lbs MAIN SPINDLE C-AXIS: Minimum programmable angle: .001 Deg. Rapid traverse rate: 200 RPM C-axis repeatability: +/- .006 deg. C-axis positioning accuracy: .0167 deg. Y-AXIS: Y-axis travel: 3.94” Y-axis rapid traverse rate : 295 IPM Y-axis repeatability: .00012” Bed. Saddle & Cross Slide X axis travel: 9.8” Z axis travel: 22.8” Angle of slant bed: 30 degrees X axis rapid traverse rate: 790 IPM Z axis rapid traverse rate: 945 IPM X, Z axis ball screw diameter: 1.3" TURRET: Number of tool stations: 12 Tool holder type: BMT 55 Turning tool shank size: 1" Boring bar diameter, main spindle: 1.5" Boring bar diameter, sub spindle: 1” Tool selection: Bi-directional ROTATING TOOLS: Rotating tool RPM: 50 - 5,000 RPM Rotating tool spindle motor (15 min rating): 7.5 Hp Rotating tool torque: 34.7 ft-lbs Rotating tool collet type: ER25 Milling collet capacity: 1/16” to 5/8" SUB-SPINDLE: B axis travel (sub-spindle): 22.8” Spindle speed: 60 – 6,000 RPM Spindle motor: 10 HP Maximum torque: 34.7 ft-lbs. Spindle nose: A2#5 Spindle bore: 1.77” Draw tube ID: 1.38" Rapid traverse rate: 787 IPM Minimum programmable angle: .001 degree COOLANT SYSTEM: Coolant pump pressure: 65 PSI Coolant pump motor: 1.2 HP Coolant tank capacity: 39 gallons EQUIPPED WITH: Fanuc 18iTB CNC Control Automatic Tool Setter 8" 3-Jaw Hydraulic Chuck on Main 6" 3-Jaw Hydraulic Chuck on Sub 12 Position Turret CHIP CONVEYOR Some Live & Static Holders Floor space: 123” L x 67” W (w/o Chip Conveyor) Approximate Weight: 10,670 LBS Voltage required: 205 - 235 volt / 3 phase Power requirement: 51 KVA (134 amps at 220 volts)
Recorded options
These option names were recorded; installed, included and operating status is not established.
TRANSFER THE SEARCH
Related DOOSAN PUMA 2000SY records.
Historical listing record
CNC Lathe · MBB-R-4D58D2BD80582007 DOOSAN PUMA 2000SY
- Recorded asking price
- $45,000
- Recorded location
- Not published