2017 DATRON M7-HP machine research record.
This is an independent observation retained for machine research. A recorded status or asking price is not a live-inventory claim. Confirm the exact unit, seller, ownership, configuration, condition, price and availability directly with the originating source.
About this 2017 DATRON M7-HP observation.
The catalog retained a used Vertical Machining Center record, PA and $30,975 as of September 13, 2024. Its source-state label is “Historical listing record.” None of those fields independently proves present availability.
Compare the machine, not only the ad.
Use the persistent DATRON M7-HP model page to compare known specifications and related records. Then verify the exact unit through data plates, control screens, option lists, maintenance evidence and an independent inspection.
Evidence boundary for MBB-R-CA922C774BE1.
- Record identity
- MBB-R-CA922C774BE1 · MBB-owned public code
- Last catalog observation
- September 13, 2024
- Recorded source
- Source URL not retained in this public record
- Recorded asking price
- $30,975 · currency and terms not separately retained
- Recorded location
- PA
- Specification scope
- Source-recorded exact-unit fields; not independently verified
- Source-state label
- Historical listing record
- Present availability
- Not independently confirmed by MBB
- MBB role
- Independent research record; not the seller or broker
- Originating source URL was not retained in this public record.
A source observation establishes what was recorded—not title, ownership, present condition, present price, present availability or a transaction offer.
Use this 2017 DATRON M7-HP record as the starting point.
Carry the recorded machine identity into a source check, market watch, production-ready cost plan, value brief, seller intake or provider search. MBB does not claim ownership or present availability.
Know what happens after the machine is found.
Transfer this 2017 DATRON M7-HP record into the provider and preparation paths required to move, place, support and fund the equipment.
2017 DATRON M7-HP source-recorded specifications.
These fields were retained with the source record and have not been independently verified by MBB.
- Y Axis Travel
- 25.59 "
- X Axis Travel
- 20.47 "
- Z Axis Travel
- 9.45 "
- Spindle Speed
- 60000 RPM
- Spindle Taper
- 25
- Tool Changer
- 11 ATC
Additional record details
X Axis Travel: 20.47" Y Axis Travel: 25.59" Z Axis Travel: 9.45" Spindle Speed: 60,000 RPM Spindle Taper: E25 Tool Changer: 11 ATC Table Size: 18" x 12" Description: - Low height that increases the workspace of the machine - Double encapsulated spindle providing optimal protection against chips - High clamping forces - Suitable for all DATRON CNC milling machines with the appropriate holder in the machine table (see technical data) Technical data: - Basic body length: 160 mm - Total length: 200 mm - Basic body height: 50 mm - Clamping jaw width: 125 mm - Clamping force (max.): 35 KN - Table Grid: 100mm x 100mm *Info kommt von Sven - Weight: 6,4 kg -Gantry Style Machining System with Fabricated steel bridge filled with polymer-concrete for vibration dampening and stability (8” gantry clearance) - Solid granite table with 20" by 20" work envelope - Precision fine pitch ballscrews for better than ±0.001" positional accuracy - Digital servo drive system complete with ground ballscrews on each axis, two linear guide ways per axis, precision encoders on each drive motor with index pulse disc on each ballscrew and over-travel limit switches . DATRON CNC v9 Control System 3D-CNC control software for DATRON CNC machine: Windows based control software allows user to operate the machine. Comes complete with conversational control, CNC Hand-held control unit B6 Integrates primary machine function control into single hand -held unit Integrated emergency stop Programmable function keys High frequency 0.6kwatt spindle with 6mm collet Spindle comes complete with Type 2 high frequency converter. Cooling unit is not required. Microjet cooling system with 5L tank: Microjet high pressure mist system efficiently cools and lubricates the cutting tool . Microjet can dispense alcohol or oil. Two Nozzle head for Microjet Adjustable nozzles with knucklestyle spray hoses. Tool change unit with 15 tool capacity (M7 only): Pneumatic (covered) tool change magazine comes complete with tool length sensor. DATRON CNC V9 Iso+ (Scope of Delivery: Protected Areas, Tool Monitoring ISO IN /OUT, Smoothing Function DATRON CNC v9 EXPERT incl.ISO+ Software Upgrade from DATRON CNC v9 ISO+ to DATRON CNC v9 EXPERT incl. ISO+ Z-height surface sensing precision probe TP-R: The high precision probe uses Renishaw TP20 magnetic break-away head with replaceable ruby tips. 3D Software Extension for Z probe: Software option allows user to edge find for quick set-up and exporting of x,y data points. VacuMate 12"x18": Regular hole pattern - Busch Vacuum Pump
Recorded options
These option names were recorded; installed, included and operating status is not established.